Online Community of Zenith Builders and Flyers
Hi
We are finally at the point to resume the phase one testing (previous owner had 31 hours in). Obviously we want to do our own testing. The CH 701 we purchased did not have the slats on it but did have the VG's on the wing and stabilizer. I have basic POH V-speeds from other 701 owners with the "stock" set up. In the current configuration that we have (no slats with VG's), what should we expect to see in changes for stall speeds, take-off speeds etc. I know this varies on a lot of different issues (engine, gross weight) but what should I expect based on just the removal of the slats and installation of VG's?
Thanks
Jerry
Tags:
Hi Jerry,
Lots of info on that subject under discussion : "Installing Hall Brothers Vortex Generator Kit (WING VGs) to the CH701 wing" on my page.
Basically, I can say that the nosewheel comes off/on at 38 mph indicated. I can pull the nosewheel off as soon as the speedo gets to 38mph which is almost the same as before with the Slats. The takeoff run seems to run the same lenght but the speed seemed to build faster. The 701 will takeoff comfortably at 48mph; lots of control.
I got 750 fpm at 54mph and could hold this forever.
Slow flight/ Stalls : The 701 with Slats won't stall; it will mush nose high and descend at 1000fpm under control. With the VGs, you can still slow flight this thing and it will sort of stall right ahead but as soon as the nose comes down you're flying again... Lateral control stayed good at all times...My 701 is on the nose heavy side, when the speed bleeds it wants to nosedown and start flying again.
Flying : With the Slats, I usually did 550-600fpm at 52mph (full gaz,pilot) ..., I am now doing 600fpm at 60mph. This is better ! Full throttle, easily doing 85mph and keeps going where before 85mph would be pushing it !
I can pull back on the power 5300rpm(MAX), 4900rpm, 4500rpm, 4200rpm and I'm still doing 70mph.
So, nosewheel off (38mph), takeoff (48mph), TopSpeed (90mph), cruise 70% (80+mph), pattern (60-65mph), landing (56mph) for a smooth touchdown and no hassle control.
For turns, coordinate AILERON - RUDDER. For landings, keep your speed UP (60mph) for the first few hours (15-20hr) and DONT use the FLAPS - you dont need them.
You'll just LOVE THIS. GUARANTEED !
Regards,
Norm
CH701sp - No SLATS, VGs Wing+Elevator
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).