Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
750 rudder skin shifted
Hello while starting my rudder build everything lined up fine initially
however while drilling and clecoing i noticed that the holes toward the bottom trailing edge of the rudder where close and in some cases outside of edge distance. I followed the instructions in the photo guide , but it appears that the duck tape was not strong enough to keep the skin pulled towards the spar. So i am not thinking of relocating some holes to keep them within edge distance
Replies to This Discussion
-
Permalink Reply by Bob McDonald on
-
Did you follow the instruction regarding placing a spacer under the trailing edge of the rudder during construction?
Holes will line up if the rudder is correctly installed.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
