Fuel level sender interference

I'm installing the (15 gal) fuel tank in the wing of my 601XL QB kit. The fuel level sender is located on top of the tank. An aluminum cover plate fits on the skin over the top of the sender. The cover has a piece of plastic glued to the underside to insulate the sender connector. My problem is that the sender sits about 1/8" too high and the cover won't fit properly. My tank is positioned ok vertically as observed by the fuel drain welded on reinforcement protruding almost fully through the skin on the bottom and the outlet is aligned with the hole in the rib.

Is this a normal condition? What do other builders do to correct it? Depress, or bend in, the top of the tank where the sender is? I'm about to begin making another cover from fiberglass or CF with a small bump in it to give clearance for the sender top, but thought I'd check here first for possible other solutions.

Views: 325

▶ Reply to This

Replies to This Discussion

Permalink Reply by Louis W. Ott on March 17, 2010 at 4:25pm
Thanks. That is the fix I was thinking of. Nice to know I'm not out in the weeds by myself. I have seen a few 601XLs with the flat aluminum cover and wondered how they did it. I think I now know, but could be a different sender than the high tech VW Beetle I have.
Permalink Reply by Bill Pagan on March 17, 2010 at 5:22pm
Another idea is to use hubcaps from one of the wheel manufacturers. They are normally domed as is Steves
Permalink Reply by Louis W. Ott on March 17, 2010 at 5:47pm
I think the curvature of the wing would not let the hubcap lay flat enough to look decent. I've begun to make a female mold for a cover layup.
Permalink Reply by Louis W. Ott on March 17, 2010 at 11:08pm
Yeah a nice spinner hubcap should do the trick. Thanks for your mold offer. I have a clay male mock up done. A bit more finish work tomorrow and I can pull a female mold from it. Here is a pic when I started to shape the clay.
Attachments:

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service