Informed Opinion Needed

No%20radius%20%28640x640%29.jpg

I got a little aggressive when dressing C75T2-3 (Rear Spar Attach Bracket for the Cruzer) and didn't have enough material to put a proper radius here.  Since this is a structural part, should I order a new one and try again or will this be acceptable?

Thank You;

Gary Reed

Views: 353

▶ Reply to This

Replies to This Discussion

Permalink Reply by Carlos Sa on June 13, 2016 at 7:19pm

Gary, at the very least for peace of mind I would make or order another one.

You could also give Roger a call and see if can suggest a way to save the part.

Good luck

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service