for those that have built the 601-HD or HDS, with the battery mounted behind the seats, where have you run the battery cable? Through the center tunnel or through the seat pan.

Views: 344

Reply to This

Replies to This Discussion

Both options look good. I ran mine outside of the cabin in left center wing.

Hello Russ,

Here's a pic of where I routed my battery cable. http://n631dg.davegardea.com/fuselage.html#1

This brought the power right up to my bus bar on the lower right side of my panel. I also slipped some vinyl tubing over the cable to protect it from chaffing.

Regards,

Dave

I ran a # 8 Red Positive thru the center tunnel, Ground was a braided strap from the negative to frame with a # 10 also ran down the co-pilot side for a isolated ground for my electronics. 

.

.

.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service