Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
WTB 0-235 engine mount
Just checking to see if anyone has a conical mount for an O-235 they are interested in selling. This is for a Cruzer so the I believe the CH750 STOL or CH650 mounts would work. Thanks!
Mike
Replies to This Discussion
-
Permalink Reply by Gil DeVault on
-
I have been looking for one for my XL601B but no luck. Am also looking for a cowl. I am going to order some 4130 in the morning and build a jig and make my own mount for the 0-235 C1B
-
Permalink Reply by Wayne Woloshin on
-
Are they not available from Zenith?
-
Permalink Reply by Doug Johnson on
-
Engine mounts are available from Zenith.
Check this link.. http://zenair.weebly.com/lycoming.html
-
-
I think they want to make it and save some money ?
-
-
Started fitting tubes on my 0-235 c this evening, will start tack welding tomorrow. Should not have over a hundred dollars in jig and steel
-
-
Material Cost and Gas is least expense , knowing how to weld the Chrome Moly and make the Mount that will support the Motor and not break and fall off in flight or run up. This requires a lot of skill from what I have seen ,that most of us do not have, I hope you have. Good luck!!
-
-
Well I not a retired dishwasher! Lol. Gas welding is not all that tough. Keeping everything from warping is the hardest thing for me. You have 8 fixed points that must line up when your done welding. Just for the record though, I have welded a,Double Eagle, Legal Eagle, And a WagABond.
-
-
-
-
Interesting, like to see it when finished.
-
-
Did you get it finished yet, does it fit to your liking?? Would like to see finished Mount. Tks Wayne
-
-
it fits I wont cut cross tube until engine mounter to firewall and will then tack weld in place
-
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
