Online Community of Zenith Builders and Flyers
I'm about the start installing the nutplates on the fuselage floor access door and was curious as to whether you guys have been using the regular domed head rivets, or dimpling the surface and going with flat head rivets? Seems like the gap with the domed head rivets may be excessive...or is really not an issue?
Thanks,
Don
Tags:
Don,
I just used the dome head rivets. There are enough holes into the aft fuselage so I figured the little gaps here didn't seem to be any different.
Dave G.
Don , what I like to do ,is use tinnermans, instead, and put them on .016 x 3/4 slats, with a couple of flush [filed head ] rivets, much cheaper,and easier, I also put the leading edge of the door on top of the fuse bottom , just notch the front corners ..BOB
Thanks Bob; must admit that I had to 'Google' tinnerman's as I hadn't heard of them before...I've used them, just didn't have a name for them until now :)
Thanks Dave; think I'll go with your suggestion and keep it simple.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).