Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
701 Ring mount water pump outlet clearance
Just uncreated my new 912 and installed the ring mount, but the lower left water pump elbow sits too close to one of the ring mount brackets, can’t install the hose and the clamp because of the lack of clearance. Any ideas? Seems this issue would be worked out by now.
Jim
Replies to This Discussion
-
Permalink Reply by Jim and Amelia Isaacs on
-
It’s a Dayco, I’d post up a picture if this website would only let me.
-
-
And after discussions with Roger, who is graciously in liaison with the North American Rotax distributor on my behalf, I have reverted to the Conti (whoever and wherever they are) hose that was supplied as original equipment with the engine due to concerns expressed by the Rotax tech that the S shaped automotive heater hose might collapse. Although the FWF kit includes a Dayco hose for the radiator, I decided to go with that recommendation and I was able to clock the lower left bent socket and reposition the Conti hose satisfactorily.
- ‹ Previous
- 1
- 2
- Next ›
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
