Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
which side to mount 2.5 gallon header tank
Getting ready to install the Viking header tank on the Cruzer. While in the "hell hole", it occurred to me that it MAY make a difference as to which side to install it. The weight is what I'm considering (2.5 gallons plus the tank weight). I weigh 220 and my wife is considerably smaller.
If I'm flying with her, or if I'm solo, would it make sense to install it on the passenger side of the fuselage to help balance weight? The videos all seem to show the installation behind the pilot. Or is this a non-issue?
Thanks.
Replies to This Discussion
-
Permalink Reply by Loren Warner on
-
We found it easier to mount on the pilot side of our 750 STOL because of the flaperon motor location, and the aircraft seems well balanced and handles fine. But in our case the pilot is only 130lbs.
-
Permalink Reply by Allan Gratia on
-
Lucky pilot!
-
-
My son, not me.
-
-
Yeah, I wondered about the motor.
-
Permalink Reply by Terrence "Dr. Terry" Hall on
-
Allan:
Your reasons are the same rationale for my decision mounting header behind the passenger seat.
I have done that and the flap motor is not a problem.
Please note the benefit of access panel on passenger fuse that allows a 250 lb access to header.
The tribulations of working in that hell hole in the belly can not be underestimated.
I purchased an aftermarket kit from Wisconsin that was perfect.
Most of the pictures are on my Zenith page. Google zenith or experimental access kits and it will show up. All of the hardware and instructions come with the "Race" kit. Some kid has taken over for Race.
Loren is a great source on Zenith construction for as long
as he doesn't get swallowed in the melting permafrost.
Greetings
-
-
Thanks, Dr. Terry. I saw the pics on your page. What are the dimensions and would you do anything differently?
-
-
No, I found nothing needed changing, I just cut the fuse after I had the kit. Approximate size is in the picture. Go to mykitairplane.com from MIke now that Race retired. I think it was LAD?
-
-
Thanks, perfect.
-
Permalink Reply by Fred Westbrook on
-
I made a pilot side access, for the header tank. Makes things so much easier to get to and inspect.
-
-
I also will create an access. Do you have a picture and dimensions, please?
-
-
Terrence Hall installed a header tank access door on his 750 Cruise. I'll ask him to chime in.
-
-
Thanks..
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
