Ch 750 Gen 3 components

SOLDSOLDSOLD

Kit registered with the MD-RA service 

Wings completed and open for MD-RA inspection, including Dynon AOA heated pitot, remote ADHRS and OAT probe, dual 12 gallon fuel tanks, Viking fuel pumps and pressure restrictors plumbed into the wings. The wings are complete with Powerburst Plus nav/position/strobe lights from Aveo engineering and Vega TLR underwing landing lights also from Aveo Engineering, also included are the Red Cube flow sensors.

Flaperon and slat kits are started not yet complete.

Horizontal stabilizer is complete with electric trim tab installed

Rudder is complete.

Complete drawings and full set of Homebuilt help videos included.

Everything listed above prices out at $26,000.00 Canadian from Zenith, looking for $9500.00, time to clean up the shop!!

Views: 1849

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Joe Scheibinger on August 12, 2018 at 1:55pm
Mike, were you planning to put the 180 HP engine on the 750? Has anyone else that you know of put that much power on the front of one of those? What an incredible plane that would be!
Permalink Reply by Michael W Mallock on August 12, 2018 at 5:17pm

Hello Joe, i was so, the extra power for take off on floats would be nice!! As the plane is rated for 160 hp i don't think the 180 would be a stretch.

Permalink Reply by Michael Zenoit on September 4, 2018 at 12:03am
Hello,

The kit still available?

Thanks
Permalink Reply by Michael W Mallock on September 4, 2018 at 5:04am

Yes It is.

Permalink Reply by Michael W Mallock on February 28, 2021 at 10:56am

Bump, time to sell!!

Permalink Reply by Wayne Woloshin on February 28, 2021 at 6:00pm

Hi Micheal, Is this kit a Ch750 or the new CH750 Super Duty?Thanks Wayne

Permalink Reply by Michael W Mallock on February 28, 2021 at 6:07pm

Regular CH 750.

Permalink Reply by Rick on June 10, 2021 at 8:59pm

HI Michael, 

Is this all still available? Is this dual tanks in each wing? Also is there inspection Panels at the fuel pump location and regulator location? These may have to be changed. 

Thanks, Rick

Permalink Reply by Michael W Mallock on June 11, 2021 at 8:18am

Hello Rick, yes dual tanks in both wings, i used George Race supplied inspection panels next to the fuel pumps for that very eventuality!

Permalink Reply by Rick on June 11, 2021 at 1:06pm

Thanks for the quick response, That's some good thinking and planning ahead. I haven't decided what my next plan is as of yet. I can't seem to get a straight answer anywhere if a 750 wing will fit a 701 fuselage?

Permalink Reply by Dan Pohle on June 12, 2021 at 12:22pm

Yes. The 750 wing can be made to fit on a 701 Fuselage.

A CH801 wing can be fitted to a modified 2 place competition STOL fuselage.

Attachments:
Permalink Reply by Michael W Mallock on May 8, 2022 at 9:13pm

Spring, time to clean out the shop!!

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service