Online Community of Zenith Builders and Flyers
This site has addressed what to do for securing the oil filter, any suggestions with regard to the oil drain plug? Drilling the bolt head or installing a water pipe clamp, both with wire tie.
Tags:
You can drill the bolt head and safety wire it. But since you're using an auto conversion engine, you could probably buy a pre-drilled plug made for that purpose for auto engines. Not sure where you get them, but I know some folks have bought them off eBay for their cars.
That is what i opted to do, drill the drain bolt head.
Drilled and safetied...
Hint - note location of properly torqued drain plug flats and make a mark to faciliate a "best" location for drilling and routing of safety wire to help ensure a positive tension on the safety wire.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).