Greetings folks- I am the third owner of a stol 750 that was a 2009 kit, and completed in 2012. I know that only a few months after the kit was purchased by the original owner, zenith adjusted future kits going forward in 2010 as well as provided a modification to pre changed kits that did some structural changes to the spar and overhead section, allowing the max gross weight to go from 1320-1440 lbs. However, if you listed the max gross as anything over 1320 in land configuration (versus float), it wouldn’t qualify as an SLSA anymore. All of my paperwork still shows 1320 as the listed max gross weight with the SLSA nomenclature. But I have no idea if the builder took into considerations the 2009/2010 kit modifications that allowed it to structurally be able to max gross out at 1440.

https://www.kitplanes.com/gross-weight-boost-for-eab-zenith-ch-750/

How would I visually confirm the presence or lack thereof this 2009 modification?

Views: 302

Reply to This

Replies to This Discussion

Here is a picture of the Edition 3 attach plate.  The most obvious change is three bolts instead of rivets and the larger rivet size.  This is the only place I am certain you can see a gross weight increase part on a completed aircraft.  The assembly guides are still mostly edition 2 pictures so it was interesting to see all of the changes in the plans that increased the gross weight to 1440.  Sometimes new doublers and sometimes hardware changes.  I think there is also a hardware change on the gear attach that might be visible.

Thanks John. I appreciate the confirmation and photo.  Per the previous messages and exchange with the other John on this topic, he was able to confirm the thickness difference between the two plates (0.12 vs 0.19 inches thickness), so I've got my digital calipers all packed up in my flight bag for next time I run to the hangar. It will be good to know another bit of info in the question at hand. 

It would be difficult to determine that the triangular spar gusset at the main strut attach point had been upgraded with a snake. If my memory is correct the only difference was that the gusset was thicker. If it was larger in surface area (and I don't think it was) it was not by much.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service