Tags:
I had a similar situation on my 750. I made a trim tab (approx. 4x8) installed at the end of the R flaperon attached with three 6-32 riv-nuts and machine screws. I made a guess and bent it at 20 degrees down and that was just right.
Here is the Zenith factory solution in a video. Zenith YouTube Flaperon adjust
It worked on my CH750 STOL just by hand squeezing the edge with my fingers.
Andrew,
If your airplane did not have a heavy wing prior to removing the wings then find what changed when you reattached the wings and you will correct the problem. If you visit the Zenith builders site https://zenithair.net/builders-page-for-the-ch701-stol/ you will find the drawing that shows the deflections and how to measure them.
Yes that could very well be your issue. Good luck!
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).