Online Community of Zenith Builders and Flyers
The mini header tank has 2 threaded ports on the top for fuel from each tank. I know of one person who has used one of those ports for venting and placed a T fitting in the other to run both tanks into it. Has anyone tried anything different? I’m considering drilling and taping another hole to use as a vent back to the tanks.
Tags:
I just bought one for my 601 HDS. What was the outcome of venting each tank to the mini tank?
This is what I did, a tee on the incoming lines and a tee on the vent lines.
I vented back to the tanks.
Works well, I'm still getting 80 liters per hour flow rate using 5/16 lines.
I was debating going to 3/8 lines but not necessary.
Where did you vent to on the tank? My tanks have a tube going from near the gas cap through the bottom of the wing
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).