Viking 130 radiator quick connect leak

Has anyone had issues with coolant leaking at the radiator quick connect? On first coolant fill a leak was detected at the disconnect. A slow but unacceptable leak. Is there something that can be done to make sure the "O" ring is seated properly? Lubricant? Sealant?? New fitting?

Suggestions?

Views: 39

▶ Reply to This

Replies to This Discussion

Permalink Reply by Glenn Davis on July 24, 2025 at 9:29pm

Bob,

I would remove the o ring, check and clean it and the mating surfaces and use waterproof grease on the o ring.

glenn

Permalink Reply by Boyd Emmel on July 25, 2025 at 8:08am

Thanks Glenn,

I will give that a try. I released the fitting to inspect. It seems good, bud I will add lube and try again. 

Boyd

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2025   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service