Online Community of Zenith Builders and Flyers
Tags:
hi jamie,
i have a sonex waiex with jab3300. the sonex factory was testing the ground adj sens. props on the aerovee and jab3300.
the props with the jab started developing cracks near the hub. use caution and check for cracks. sonex never sold the gnd adj sens. props to jab engine fliers.
good luck with your testing. be safe!
michael.
About 400 hrs on my GA Sensenich prop/Jab 3300 - no cracks, no problems! :>)
John
N750A
I have mine set at 16.5 degs. Its important to not over pitch the engine. During take off roll I get 3000 rpm and then climb out at easy 1000fpm. Max level rpm about 3250 and getting 115 kts. This is plenty fast enough and I cruise at 2800 and 105 kts. Best to set pitch a bit lower then slowly increase to get into right rev range during cruise. If you have EGT monitoring then you will see the EGT's rise as you throttle back, bing carby doing its thing. Enjoy your plane, the 3300 is a great match for the airframe.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).