I am installing a Rotec alternator kit in my CH601XL that has a Jabiru 3300 engine. I have run into a couple of problems and am seeking help on two issues:

1. The Jabiru alternator that is now in the plane has two ignition coils that have wires that connect to the two distributors. When these are removed to allow for the installation of the Rotec kit, there is no longer a connection to the distributors. Without current to the distributors, the engine will not start. Moreover, the installation instructions for the Rotec kit  provide no advice on this problem. Any thoughts on how to deal with this issue?

2. The installation instructions for the Rotec kit specify that the magnetic ring that is aft of the flywheel needs to be removed and the drive pulley installed in its place. I have removed the four button head screws that serve to hold the magnetic ring in place. However, the ring does not come off. Any advice on removing it?

Thanks, in advance, for any help you can provide.

Gene

Views: 193

Attachments:

Reply to This

Replies to This Discussion

gene,

try a post in jabiru engine forum, hope the plane is flying good for you, too bad you don't still fly down here

Thanks for the lead Chris. The plane is flying well now. Took quite a bit of "fine tuning" to get it that way.

I miss seeing you and hope that you are doing well.

When I get everything fixed on the plane, I may be able to fly out to KCVB.

Best regards,

Gene

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service