Online Community of Zenith Builders and Flyers
I have a VDO sender and Dynon 150 display on my 3300. Oil Temps read normal until I reach 170-190 F; at that point I get continuous, instantaneous fluctuations between 170 and 220.. Fluctuations go away when the temp drops below 170. I've replaced all connectors. Anyone else have this problem? Solutions?
Tags:
Seems strange that the sensor would do that but that is what I would check next. You could remove it and check its resistance while heating it in water brought to a boil.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).