Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
GRT6000 fuel gauge calibration
I am having trouble getting my fuel gauge calibration set correctly. I have Zenith supplied vow sending units mounted on the side of tank per the plans and drawings. The sending units should read 0 empty at 11 ohms and full at 0 ohms if I remember correctly. Following GRT calibration directions I am no where close to correct readings. Can anyone share the correct calibration settings. Thanks
Replies to This Discussion
-
Permalink Reply by John Austin
-
The VW senders as supplied by Zenith are about 10-70 ohm range as I recall. Just put an ohm meter on them to verify.
John
N750A
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
