Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Zenith 701 Transition Training RequiredI am in need of transition training in our new to us 2003, 500hr CH, 701 in South West Montana. Aircraft has spent the past 6mos being gone… Started by Dan Fison |
4 |
May 22, 2023 Reply by R Michael Moore |
Vinyl Wrap Updates?Recently, I noticed the clear protective tape (aviation-grade leading edge tape) I have on the extended lip on the underside of my 750 STOL… Started by John Austin |
7 |
May 17, 2023 Reply by Matt Pope |
Front landing gear for 601 ulHi I'm looking for the plans or complete drawings showing the front landing gear with all the components and how it's joint to the fire wal… Started by Peter Frew |
0 | May 17, 2023 |
Vinyl wraps more than 4 years old???I would like to hear from folks who have at least 4 or more years on their vinyl wrapped plane. How is it holding up? Would you do it… Started by charlie rosenzweig |
1 |
May 16, 2023 Reply by Bob Simmons |
2013 750 Kits Pre drilled?Hi everyone, I am looking at buying a 750 kit that was manufactured in 2013 but haven't been able to look at it since it's a two day drive… Started by Rick Porter |
5 |
May 16, 2023 Reply by John Burns |
Need replacement for FL760 radio, suggestions?My Flightline 760 radio died after 800 hours. Looking for ideas for replacement, need to fit 2 1/4 inch round hole in panel. Goes in 750 Cr… Started by Ralph Powell |
10 |
May 16, 2023 Reply by Steve Danielson |
Checking tire pressure with wheel fairings onI am using the Zenith wheel fairings on my Zodiac 650B. What methods do others use to check tire pressure short of removing the wheel fairi… Started by Larry Zepp |
0 | May 13, 2023 |
rudder pedals in the 601 xlbI am 6' 2" and eating my knees, bashing them into the instrument panel. There is no rudder pedal adjust available. Has anyone moved the rud… Started by Tim Dura |
8 |
May 11, 2023 Reply by Alan Lutz |
Thanks guysJust wanted to give a shout out to all who posted on this thread. 5 years later it is still very helpful to us who are just now beginning… Started by charlie rosenzweig |
0 | May 10, 2023 |
801 Alaska Bush WheelsI’ve been doing a little work on my 801, and I figured it was time to write up what I have done. As some of you know, I put my 801 on… Started by Daniel Niendorff |
29 |
May 7, 2023 Reply by Daniel Niendorff |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).