Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,838)
| Discussions | Replies | Latest Activity |
|---|---|---|
Routing of CH701 tail light and elevator trim wiresI'm looking for solutions to routing the tail light and elevator trim wires around the elevator and into the fuselage on a CH701. Also, did… Started by Lex Brown |
1 |
Jul 4, 2012 Reply by Bob McDonald |
fuel sender not reading accuratelyOn my 750 I installed the stock VDO fuel sending units in the stck positions and bought a set of VDO fuel gauges from Zenith with the match… Started by Jimmy Young |
8 |
Jul 3, 2012 Reply by Jimmy Young |
Waldo Lake, Oregon - petition to keep float planes off!We were at Waldo Lake today, it is beautiful. There is currently a gas motor ban on the lake and nobody is complaining, but the Aviation Bo… Started by Jake Reyna |
0 | Jul 2, 2012 |
Zenith Banquet 2012Zenith Banquet for Oshkosh EAA 2012 The Oshkosh Experimental Aircraft Convention is less than 4 weeks away! It's time to make plans to at… Started by Joe Scheibinger |
0 | Jun 29, 2012 |
continental 0-200Hi I am at the stage of the build where I need an exhaust for my plane does anyone know if there is an off the shelfe exhaust that will fit… Started by Russell Bell |
1 |
Jun 25, 2012 Reply by Jim B Belcher |
fuselage cage 750Hi everyone Im starting the cage install on the 750, there is a problem lining up the lower fuselage section and cage I have about 45mm of… Started by Philip James Weston |
4 |
Jun 24, 2012 Reply by Aaron May |
Prop selectionhey newbie to the group!! so could use your help Would like to no what propellors, size and pitch are being run on your 750's with o-20… Started by Clay Hightower |
2 |
Jun 20, 2012 Reply by Ken Ryan |
Wing StrutsHi l have just purchaced a Ch 701 which need repairs l want to replace the wing struts does any one have the dimension of the aluminum wing… Started by Geoff Storey |
2 |
Jun 13, 2012 Reply by Geoff Storey |
Do I Need a Special Head for A6 Rivets?I got my Edition 3 plans and wing upgrade parts recently and noticed that the new wing root ribs need A6 rivets instead of the previous two… Started by Paul Sanders |
5 |
Jun 12, 2012 Reply by John Austin |
More Light weight Interior stuffOK Guys and Gals, Just to put in my thinking on two items that were brought up on the light weight interior: About crushability and ene… Started by Phil Smith |
1 |
Jun 9, 2012 Reply by Bob Pustell |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
