Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Cold engine startsHere is a trick I learned starting cold engines. I have built a couple of engine pre heaters and they work, but to heavy or big to take wit… Started by Bil Gillam |
2 |
Mar 6, 2010 Reply by james lewis long |
Cruise pitch?I am just about done with my 701 and have a 912S Rotax with the warp drive 3-blade prop that I believe is 70 in. Am wondering what is the b… Started by Thomas Richardson |
4 |
Mar 2, 2010 Reply by Rudi Venter |
Setting up shopI should receive my CH750 fuselage, and eppenage kits in mid March. In the meantime, I will be clearing out my 20'x20' woodshop and convert… Started by David A. Wiebe |
1 |
Mar 1, 2010 Reply by David Gallagher |
oil cooler location and air needed to coolanyone have any info on oil cooler location and air volume needed to cool properly thanx Started by joseph aloof |
1 |
Mar 1, 2010 Reply by Andrzej Kostkiewicz |
701skin outside bottom-longeronsA builder stated that, if he should build again,,, he would mount the sideskin on the fuselage on the outside of the bottom longerons.. (a… Started by Einar Arne Kleiven |
0 |
Feb 25, 2010 Reply by Pat |
Landing LightsI am working on my wings and thinking of landing lights. I saw a 701 with landing lights in the slats. I was wondering what other people ar… Started by Larry Oswell |
5 |
Feb 24, 2010 Reply by Mike Armstead |
701 lower bearing, frontwheelIm planning to wait with the cutting/mounting of the 2angles under the steering rods. They state that it is critical to get the upper and l… Started by Einar Arne Kleiven |
2 |
Feb 22, 2010 Reply by Einar Arne Kleiven |
Search Zenith.Aero? How?I find Zenith.Aero to be nearly useless as a medium for exchanging information. The reason: I cannot discover any way to effectively search… Started by Terry Phillips |
3 |
Feb 22, 2010 Reply by Terry Phillips |
Building of the STOL from the scratchCan one build an STOL aircraft using both Aluminium and More of Steel parts Started by Amaechi Uzodinma Johnbull |
0 | Feb 22, 2010 |
Inspection Panels / HolesGuys I want to install some inspection holes in the wings and was wondering what is the best method of cutting round 7" dia. holes. I had a… Started by Mark Colbeck |
4 |
Feb 17, 2010 Reply by Jonathan Porter |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).