Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (3,036)
| Discussions | Replies | Latest Activity |
|---|---|---|
75F-4-1 Side Channel CH750I am joining the fuselage today and I have not completed the Side Channel. Does anyone know where to find the working instructions(picture… Started by Leo Arrigo |
4 |
Mar 29, 2011 Reply by Leo Arrigo |
Australia's First CH 750All everyone Australia's first factory built CH 750 is just about ready to take to the sky Just have to wait for the paper work and the fi… Started by Allan / Zenair Australia |
5 |
Mar 27, 2011 Reply by David Peterson |
Return fuel line to tankI was wondering what you guys and gals are doing with the return line fitting (by the filler neck)on the tank. I was going to put a plug in… Started by Kevin Bowman |
8 |
Mar 27, 2011 Reply by Henri Luyckx |
L AnglesI have completed the tail and I am now starting on the fuselage. I am scratch building. I have a question on the L angles. I would like… Started by Casey Zechmann |
9 |
Mar 24, 2011 Reply by Chris Aysen |
ULPower EnginesAnyone using a ULPower engine yet? They seem to be a very good engine, fuel injected, FADEC controlled. No carb heat to mess with. I have s… Started by Kevin and Jackie Kellett |
21 |
Mar 22, 2011 Reply by Paul Sanders |
Painting New AircraftHI All, i am working over in my mind whether to paint my new CH801 myself, or hire it out. I have done auto painting, but not familiar w… Started by joshua knowles |
17 |
Mar 22, 2011 Reply by Phillip Owens |
How much can I cover before first inspection in Canada?I am plans building a 701 in Newfoundland and have just finished riveting the rear bottom skin to my first wing. I would like to completly… Started by Robert Stacey |
10 |
Mar 21, 2011 Reply by Ghazan Haider |
Corvair EngineFor anyone concidering a Corvair engine or in the process of a Corvair build I suggest you look into Aeromax Avaition. I had the privledge… Started by Tom Lynch |
29 |
Mar 19, 2011 Reply by Ronald Beitel |
Rotax Aircraft Engines Service & SupportWe received the following from Kodiak Research Ltd., the North American distributors for the Rotax aircraft engines: In the past years the… Started by Sebastien Heintz |
2 |
Mar 17, 2011 Reply by Debra and Patrick Nesbitt |
Zenair floatsWith spring around the corner, Zenair is building floats as fast as possible. With 8 different sizes from 750# to 2500#, the Zenair floats… Started by Matt Heintz |
5 |
Mar 15, 2011 Reply by Paul Sanders |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
