Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Instrument Panel PlacardsI initially labelled my panel with adhesive vinyl letters. However, the local vinyl shop didn't want to make the lettering any smaller than… Started by John Austin |
0 | Jun 8, 2012 |
Contact Magazine Alternative Engine SymposiumContact Magazine is hosting their annual alternative engine symposium this Sat. June 9th in congunction with the Golden West Fly-in in Mary… Started by Woody Harris |
1 |
Jun 8, 2012 Reply by Stephen R. Smith |
Data and Fuel Cap EngravingWe are excited to add data plate and fuel cap engraving to our product lineup. You've spent all this time on your project, and it is the… Started by Steven Tschurwald |
0 | Jun 7, 2012 |
Riveting HELP neededOn the CH650 the outboard upper and lower spar cap angles are .032”. When I rivet the area of the spar with the thinner angles it is like… Started by Tim Smart |
0 | Jun 7, 2012 |
Jabiru 3300 Alternator, Starter Switch WiringI've almost finished wiring my Jabiru 3300/CH 750's panel. After studying the Jabiru Engine Installation Manual's wiring diagram, it appear… Started by John Austin |
7 |
Jun 5, 2012 Reply by David Gallagher |
Jabiru Bing overhaul manualSent an email to the factory about the the Engine tuning instructions and it's part of the JEM001-3 Overhaul manual. Tuning the Bing is sta… Started by Jake Reyna |
0 | Jun 4, 2012 |
4509 landing lightsIf anyone is using these bulbs for taxi/landing lights, can they be installed in any orientation? There is no clear 'top' marking....... Started by Darryl Legg |
2 |
Jun 4, 2012 Reply by Bob Pustell |
Computer issues...stillMaybe I missed something....why does my computer go ballistic every time I click on a picture that is posted on this site. All was well un… Started by Mike Hammond |
5 |
Jun 3, 2012 Reply by Mike Hammond |
NTSB makes safety recommendations to FAA and EAA regarding Experimental - Amateur Built aircraftYesterday the National Transportation Safety Board highlighted 16 recommendations to improve homebuilt aircraft safety following a study of… Started by Sebastien Heintz |
7 |
Jun 1, 2012 Reply by Bob Pustell |
Amphibious ramp 701I'm building a ramp for my 701 on amphib floats. Any suggestions as to an acceptable angle , that is, what angle can the 701 handle ? Tha… Started by buz heuchan |
3 |
May 30, 2012 Reply by buz heuchan |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).