Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,840)
| Discussions | Replies | Latest Activity |
|---|---|---|
Flutter/hingesHas anyone found out if the aircraft in question had regular hinges, or the sheet metal hinges? Started by William Campbell |
2 | Apr 20, 2009 |
Phone numbers and e-mailsIs there a place on this site where a person can find the phone numbers and e-mails of builders to use in making contacts? If there is, I h… Started by Dr. Edward L. Olds III |
2 |
Apr 8, 2009 Reply by Dr. Edward L. Olds III |
New Zenith ProductPretty funny... has Chris no shame at all? ;) http://www.zenithair.com/4-1-zenith-flyer.html Started by George Harris |
1 |
Apr 2, 2009 Reply by Taylor Ogden |
Olfa Knife - SEM pictures for the curious builderThought I would share some pictures I took of what an Olfa knife does to a sheet of aluminum. Enjoy! Ben Church CH801 Racine, Wisc. Started by Ben Church |
5 |
Apr 2, 2009 Reply by Taylor Ogden |
Creases in the aluminum, on the top surface of the wingsIs it my imagination, or do I detect some creases on the top surface of both wings in the latest 750 factory video. Look to the left side o… Started by Robert Pelland |
2 |
Mar 29, 2009 Reply by Burke Johnson |
Corvair Engine and the CH 750.First let me say that I am not an engineer and I don't pretend to be one. Most of my structural integrity lessons were learned in the schoo… Started by Donnie Moore |
1 |
Mar 28, 2009 Reply by Gus Warren |
DIY Metal Brakes for .093 and .125I am just starting to go through my plans and noticed some of the metal is upwards of .125 thick. I am planning on building a brake myself… Started by Grant Arthur |
5 |
Mar 20, 2009 Reply by Grant Arthur |
MGL EnigmaAny folks out there using, purchased or plan on using any of the MGL EFIS products? Started by Richard Simmons |
8 |
Mar 20, 2009 Reply by Bill Morelli |
Painting...Now or later?Is it best to wait for some of the test hours to be flown off before painting or paint before first flight... I am getting lots of opinions… Started by Thomas Richardson |
3 |
Mar 17, 2009 Reply by Brad DeMeo |
What's Your Favorite Gizmo or Doohickie?What is your favorite gizmo or doohickie in, on or about your airplane, and, if you are willing...why? It doesn't have to be fancy, just yo… Started by Brad DeMeo |
7 |
Mar 12, 2009 Reply by Stephen R. Smith |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
