Online Community of Zenith Builders and Flyers
Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Zodiac 650 Continental PropellersI would like to know the Manufacture, Type, Length, Pitch of Propeller to install on my Zodiac 650 to give me the best preformance? Any rec… Started by Mark T. Alexander in Open Discussion Forums (non model specific) |
8 |
Jul 10, 2009 Reply by Mark T. Alexander |
AutopilotI Recently installed an MGL Avionics - Enigma EFIS (that will drive Trio autopilot servos) in my CH601 HDS that has 630 flight hours. My pl… Started by Bill Morelli in Open Discussion Forums (non model specific) |
6 |
Jul 10, 2009 Reply by Bob Simmons |
The construction methods of the new CH-750, are a horse of a different colorI wrote a small article a little while back, that has just been published in the latest edition of the " Zenith Newsletter ". Since not all… Started by Robert Pelland in Open Discussion Forums (non model specific) |
3 |
Jul 10, 2009 Reply by Scott Sutton |
Bending sparsdisscussion carried over from the blog site regarding my problem with forming my flaperon spars.I will get some pics of the spars and my be… Started by Dwayne Roos in Open Discussion Forums (non model specific) |
2 |
Jul 8, 2009 Reply by Dwayne Roos |
Cortec ConcernsThis afternoon I applied Cortec to my rudder ribs & spar... and it's a mess. I used some denatured alcohol (as in HomebuiltHelp's "Met… Started by Patrick Underwood in Open Discussion Forums (non model specific) |
5 |
Jul 8, 2009 Reply by Patrick Underwood |
Ugrade airframe for 912 engineI just bought CH 701 built in 1995 and an upgrade set of plans, would someone know what needs to be improved on the airframe to bring it up… Started by Michel Proulx in Open Discussion Forums (non model specific) |
4 |
Jul 3, 2009 Reply by Ralph Sanson |
Just another day in paradiseI need to start out with the following caveat; I can't compete with Scott Laughlin's flight reports. In fact the only way I can compete wit… Started by Dr. Edward M. Moody II in Open Discussion Forums (non model specific) |
10 |
Jul 1, 2009 Reply by Dr. Edward M. Moody II |
601xl wing alignmentplans say wings perpendicular to center line. any helpful info on this? my mind is making this too complex I suspect. how have you aligned… Started by Mike Clark in Open Discussion Forums (non model specific) |
3 |
Jun 19, 2009 Reply by Juan Vega |
ClecosI'm heading down to Mexico, Mo. in a few weeks to pick up the wings and fuselage sections of my 750. I originally bought the toolkit packag… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
2 |
Jun 18, 2009 Reply by Dr. Edward L. Olds III |
PatienceI have been flying and tweaking as much as possible lately so I have been strangely silent but I'm still here. I have 11.6 hours on the Pap… Started by Dr. Edward M. Moody II in Open Discussion Forums (non model specific) |
3 |
Jun 15, 2009 Reply by Dr. Edward M. Moody II |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).