Online Community of Zenith Builders and Flyers
Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
ALODINE?I was reading in a fairly recent issue of "Sport Aviation" magazine ( I think) and read an article about a kit helicopter that had an in fl… Started by Jeff Bingham in Open Discussion Forums (non model specific) |
3 |
Apr 22, 2009 Reply by Jim LoBue |
Laying out lines for forming blocksI was looking through my plans and noticed all lines seem to be measured to the tenth of a millimeter. I am guessing no one has a pencil or… Started by Grant Arthur in Open Discussion Forums (non model specific) |
4 |
Apr 22, 2009 Reply by Grant Arthur |
Clean, wax, protect the aircraftI'm searching the best soap and the best wax (or both in the same bottle ?) to clean and restore the paint on my CH-701; I looked in the ca… Started by Carl Tremblay in Open Discussion Forums (non model specific) |
2 |
Apr 21, 2009 Reply by Carl Tremblay |
ATD 5830 rivet gun problemMy rivet gun began spewing air out of the hole underneath the trigger? The instructions for dismantling it are pretty bad! Any ideas? Pictu… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
2 |
Apr 21, 2009 Reply by Dr. Edward L. Olds III |
Flutter/hingesHas anyone found out if the aircraft in question had regular hinges, or the sheet metal hinges? Started by William Campbell in Open Discussion Forums (non model specific) |
2 | Apr 20, 2009 |
Phone numbers and e-mailsIs there a place on this site where a person can find the phone numbers and e-mails of builders to use in making contacts? If there is, I h… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
2 |
Apr 8, 2009 Reply by Dr. Edward L. Olds III |
New Zenith ProductPretty funny... has Chris no shame at all? ;) http://www.zenithair.com/4-1-zenith-flyer.html Started by George Harris in Open Discussion Forums (non model specific) |
1 |
Apr 2, 2009 Reply by Taylor Ogden |
Olfa Knife - SEM pictures for the curious builderThought I would share some pictures I took of what an Olfa knife does to a sheet of aluminum. Enjoy! Ben Church CH801 Racine, Wisc. Started by Ben Church in Open Discussion Forums (non model specific) |
5 |
Apr 2, 2009 Reply by Taylor Ogden |
Creases in the aluminum, on the top surface of the wingsIs it my imagination, or do I detect some creases on the top surface of both wings in the latest 750 factory video. Look to the left side o… Started by Robert Pelland in Open Discussion Forums (non model specific) |
2 |
Mar 29, 2009 Reply by Burke Johnson |
Corvair Engine and the CH 750.First let me say that I am not an engineer and I don't pretend to be one. Most of my structural integrity lessons were learned in the schoo… Started by Donnie Moore in Open Discussion Forums (non model specific) |
1 |
Mar 28, 2009 Reply by Gus Warren |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).