Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Splice plates confusionHi, I’m processing to change my splices plates from 6061 T-6 to 4130N in accordance with this design: http://www.zenithair.net/wp-content… Started by Daniel Pelletier in Open Discussion Forums (non model specific) |
4 |
Dec 26, 2020 Reply by Daniel Pelletier |
Significance of Zenith Model NumbersDoes anyone know the significance of Zenith model numbers? Surely 601, 701 etc. were not chosen out of thin air. Started by Ken Ryan in Open Discussion Forums (non model specific) |
1 |
Dec 25, 2020 Reply by Gary Welch |
How are you monitoring your Viking?I just purchased a Viking 90 and will be updating my panel at the same time as the engine installation. What EMS you use or how do you mon… Started by Brad Payne in Viking Forum |
25 |
Dec 25, 2020 Reply by Phil Cook |
testAny 801 drivers out there? I'm one. Started by Harley McCartney in Open Discussion Forums (non model specific) |
2 |
Dec 25, 2020 Reply by John Austin |
3300 failure to initially startHi, I've had this 601xlb with 3300 engine with Bing carb for 2 weeks now. This plane and engine are new territory for me. It ran great with… Started by Darrell Doerhoff in Jabiru Engine Forum |
40 |
Dec 24, 2020 Reply by Darrell Doerhoff |
McFarlane "Vernier Assist" Throttle ControlI now have several hours on my McFarlane "Vernier Assist" throttle control. I designed and fabricated a reversing bell crank which was nec… Started by John Austin in Jabiru Engine Forum |
2 |
Dec 23, 2020 Reply by Joe Hopwood |
701 wingsI have decided not to finish the 701 project and to sell what I have built. At 73 I would rather be flying than building, although, I have… Started by Robert Crawford in Classified / For Sale Postings |
14 |
Dec 19, 2020 Reply by John Austin |
DUC prop washersI have been adjusting the pitch of my DUC prop and have noticed that the bolts are no longer holding their torque and the washers stay flat… Started by Brad Payne in Viking Forum |
15 |
Dec 19, 2020 Reply by Brad Payne |
How to tell if a 601XL had the "B" mods done?Hi, All; As some of you know, I'm currently building a Cruzer, so aside from saying "it's a low-wing", I really have no knowledge on the 6… Started by Carl Orton in Open Discussion Forums (non model specific) |
6 |
Dec 19, 2020 Reply by Carl Orton |
Rotax Pressure Relocation kitNew never used Rotax pressure relocation kit from Lockwood Aviation Supply P/N EAPSIRK includes Oil Pressure sender GAV360-430, 4 ft of S… Started by Christopher Jon Brown in Classified / For Sale Postings |
0 | Dec 17, 2020 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
