Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Jabiru 3300 Cruzer ThrottleGents, Can anyone recommend a complete throttle cable assembly for my 750 Cruzer Jab 3300 combination please? Lots of choice on Aircraft Sp… Started by Scott Matthews in Jabiru Engine Forum |
6 |
Nov 14, 2020 Reply by Thomas Norris |
Short field landing technique in a750 Stol with UL 130 HPwould appreciate your comments John Patton 970 570 9120 Started by john w. patton in Open Discussion Forums (non model specific) |
0 | Nov 14, 2020 |
New to me Corvair engine, need advice on 5th bearing and intakeHi All, I am in the planning stage for this CH 650 motor and researching the order I should perform the conversion. I have already talked t… Started by Mark Gregory in Corvair Engine Forum |
6 |
Nov 13, 2020 Reply by Mark Gregory |
Tips for O-200 Assembly?Hi, all; I'm getting ready to finally start assembling my O-200 when some final parts come in. First a little background: In a former lif… Started by Carl Orton in Continental Engines |
4 |
Nov 13, 2020 Reply by John A. Minatelli |
Trying to solve a primer mysteryHey everyone Does anyone know where I can buy the brush on water based primer Zenair/Zenith uses I called the factory and they said airc… Started by Michael T. in Open Discussion Forums (non model specific) |
15 |
Nov 13, 2020 Reply by John A. Minatelli |
o200 on a 701new to the forum..just purchased a 701 with a a65 cont. engine..I have a low time o200 cont. engine to replace the 65...any info that I sho… Started by steve turner in Open Discussion Forums (non model specific) |
4 |
Nov 11, 2020 Reply by Glenn Johnson |
750SD nose gear.Hey guys, I was just wondering if someone could tell me the thickness of aluminium on the nose gear fork of the super duty? Im building a 7… Started by Stephen Bradley in Open Discussion Forums (non model specific) |
2 |
Nov 11, 2020 Reply by Stephen Bradley |
750 STOL for sale SOLDFlying in annual..o200 continental 251 TTSO..built in 2012 by experienced builder ...has damage history that has been repaired by owner who… Started by steve turner in Classified / For Sale Postings |
0 | Nov 11, 2020 |
Back up battery hookup 912iSHi fellow builders’ anyone who knows where to hookup the backup battery, i have been studying fig 14 of the installation manual, but the b… Started by Harmen van der Velden in Rotax Engine Forum |
2 |
Nov 11, 2020 Reply by Harmen van der Velden |
Ethanol Safe Fuel SamplerHave any of you that burn Mogas found an ethanol safe Fuel tester (the kind you sump your tanks to check for water with, NOT ethanol percen… Started by Brad Payne in Open Discussion Forums (non model specific) |
0 | Nov 10, 2020 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
