Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Mounting H3R Aviation Model A344T Fire Extinguisher in a 750Any suggestions on good placement/mount of a fire extinguisher in a 750? With the mount it came with, we're thinking that up against the p… Started by Loren Warner in Open Discussion Forums (non model specific) |
9 |
Sep 29, 2019 Reply by Loren Warner |
750 SDIs there anyone out there building the 750 SD? Just started building my 750 SD and looking for other builders websites. Started by Bob Dennis in Open Discussion Forums (non model specific) |
1 |
Sep 28, 2019 Reply by charlie rosenzweig |
Warp drive prop setting on 2700 corvairI’ve had mine on 9 and 12 degrees and damaged the plane both times.I have. It on 7 now and with a scales it pulls 320 lbs.warpdrive tells m… Started by james a board in Open Discussion Forums (non model specific) |
5 |
Sep 28, 2019 Reply by Ken Pavlou |
Tire tube installationI’m installing the tires and tubes on my matco rims. The tube has a stepped washer between the tube and the second nut. Does the stepped… Started by Carl Orton in Open Discussion Forums (non model specific) |
1 |
Sep 28, 2019 Reply by Robert Riat |
Looking for Complete Engine, Engine Mount, and Cowling for 750 STOLLooking to see if anyone has a 100+ hp engine that is complete for sale. Also needing engine mount and cowling. I have been looking at the… Started by Bryce Dibbern in Classified / For Sale Postings |
2 |
Sep 26, 2019 Reply by gary d loucks |
Fuel psiNow that I am on my 3rd flight into Phase I on my UL350i Cruzer I noticed that my fuel psi is below min. I am only getting 29 psi in flight… Started by Doug Malloy in UL Power Forum |
4 |
Sep 25, 2019 Reply by Tom Sullivan |
Hall effect sensorFinally i have a sensor in place and working. If you have a front alternator and an eis this may interest you I got rhe sensor and magnet f… Started by Fred John Thomas in Corvair Engine Forum |
4 |
Sep 25, 2019 Reply by Fred John Thomas |
Zenith Open House..... it is a small world.About 9 years ago, Ken (Staff Photographer) a member in my RC club member sold me 1/4 Taylorcraft that was a bare frame wood frame that he… Started by Darrin Towers in Open Discussion Forums (non model specific) |
1 |
Sep 25, 2019 Reply by Kenneth Stapleton |
MOTIVATION - Zenith Homecoming and Open HouseIf anyone needs some motivation to get their project done in the next year - It's the Zenith Homecoming and Open House! What a fantastic we… Started by Mark Baenen in Open Discussion Forums (non model specific) |
4 |
Sep 25, 2019 Reply by Kenneth Stapleton |
Viking Talks - Part 3 - Common Misnomers and more about the engineViking Part 2 https://www.youtube.com/watch?v=wHV0LuE8ePs Viking Part 1 https://www.youtube.com/watch?v=bU7aTGL9N0s&t=3s Started by Jan Eggenfellner in Viking Forum |
0 | Sep 25, 2019 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
