Finally i have a sensor in place and working.

If you have a front alternator and an eis this may interest you

I got rhe sensor and magnet from amazon.

Views: 411

Attachments:

Reply to This

Replies to This Discussion

I put one of those inexpensive sensors on my Jab 3300, interfaced with my RDAC/MGL XTreme EMS.  It worked great, but on hot days after being flown and then parked for a while, it would heat-soak and act erratically until the airflow on the subsequent flight cooled it off, but that mean't no stable tach output during the take-off when you need it the worst!

 

I finally bought a Honeywell GT-1 sensor which is rated for 150 degrees C, and it worked perfectly even if heat-soaked.  However, my sensor is located on the rear of the engine and since the Jab has ram-air ducts to the cylinders, it has less cooling flow in that area.  If your sensor is on the front of the engine or has a conventional cooling plenum, this may not be an issue for you.

John

N750A

I believe that WW / SPA figured out a way to read pulses off of the alternator output and cipher that into RPM. Maybe less complexity.

Mark

That would be for direct drive alternator only , though.

Mark

U are correct

I have the front alternator 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service