Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,812)
| Discussions | Replies | Latest Activity |
|---|---|---|
915is/916is in a Cruzer?I'm looking at the Skytek FWF with a 915is or 916 in a Cruzer. Probably a 915 due to cost. I am primarily looking at this turbocharged engi… Started by John Myers in Rotax Engine Forum |
6 |
Apr 13, 2025 Reply by James Dennis Yeomans, DDS |
Dual Throttle -- what's next?Not quite sure where to go with this. Is the dual-throttle set-up on the wrong side of the FW? The cabin side has lots of room for it. Started by Harley Myler in Jabiru Engine Forum |
6 |
Apr 12, 2025 Reply by Harley Myler |
Oil seperatorHi, Building a 750 with an 0-200A that came without the oil separator for the vacuum pump so I’m looking for one at the moment. Than… Started by Thomas carlin in Continental Engines |
1 |
Apr 11, 2025 Reply by Carl Orton |
Cruzer flaperon problem/questionWe started working on an outboard flaperon yesterday. The outer flaperon (aileron?) rear rib top and bottom holes line up with the spar fla… Started by Nick Treadwell in Open Discussion Forums (non model specific) |
3 |
Apr 11, 2025 Reply by William Carter |
Nosegear bearing nyloil, anyone 3d print this part?I’d like to refine my nosegear bottom bearing a bit. It’s the big plastic block the nosegear rests in that centers it when weight of wheels… Started by Keith Gempler in Open Discussion Forums (non model specific) |
1 |
Apr 11, 2025 Reply by Keith Gempler |
Removing corrosion on a fuel level senderMy VDO fuel level sensors are over 10 years old and have only had fuel inside the tank for 18 mo. Both senders matched the 10 Ohm full and… Started by Larry Zepp in Open Discussion Forums (non model specific) |
3 |
Apr 9, 2025 Reply by John Austin |
Rigging flaperonsHello I am building a 750 Cruzer, and I am trying to rig my flaperons. I can get them to the proper neutral position and the required 13 d… Started by Fred Wellman in Open Discussion Forums (non model specific) |
12 |
Apr 6, 2025 Reply by Keith Gempler |
Stratus EA-81 Subaru 100 HPNew, still in crate. Project plane destroyed by tree during storm. Asking $3,800.00. Started by William Stewart in Classified / For Sale Postings |
1 |
Apr 5, 2025 Reply by Charles Causey |
Jabiru 3300 gen4 & EarthX Batt - Overvoltage ModuleWrestling with the wiring octopus - the EarthX install manual states "EarthX requires having automatic over-voltage protection (crowbar) fo… Started by James Nichols in Jabiru Engine Forum |
6 |
Apr 5, 2025 Reply by Harley Myler |
Air filter box locationI'm installing a Zenith FWF kit for my Jabiru. I'm trying to figure out the best location and orientation for the air filter box. Could s… Started by Dan Dempsey in Jabiru Engine Forum |
9 |
Apr 5, 2025 Reply by Tim Juhl |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
