Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
Opinions on trim switches on stick grip?Sounded like a good to me until sometime said they didn't like them because it was too easy to inadvertantly bump them by mistake. I was wo… Started by Gary Welch in Open Discussion Forums (non model specific) |
9 |
Mar 21, 2015 Reply by Walt Snyder |
Heated Pitot Gretz Aero ga-1000Hi, has anyone had any experience with the Gretz-aero ga-1000. I was also looking at the Dynon heated pitot and noticed that there are alre… Started by Ken and Joel Norton in Open Discussion Forums (non model specific) |
0 | Mar 21, 2015 |
CL Corvair Engines RH and RUI am still browsing CraigsList for engines. This is too far away from me but it sounds very promising for an engine core. One is even still… Started by Bryan Walstrom in Classified / For Sale Postings |
5 |
Mar 19, 2015 Reply by Ben Proveaux |
ROTAX 4-Stroke Engine ClassThere will hopefully be a Rotax Service Course (June 2 and 3) and a Maintenance Course (June 4 - 5) at the Blue Ridge Community College in… Started by Damien Graham in Open Discussion Forums (non model specific) |
1 |
Mar 18, 2015 Reply by Damien Graham |
Re drilling flap torque tubes.Group I drilled my torque tubes for my flaps this weekend and I missed the flaps closing to a propper gap by about 8mm. I know what I did… Started by Richard Simmons in Open Discussion Forums (non model specific) |
3 |
Mar 17, 2015 Reply by Richard Simmons |
701/750 Cowling design and removal/replacement proceduresAny suggestions on design modifications and/or procedures to make cowling removal and reattachment easier? My 750 cowling is modified for t… Started by Wayne Tyson in Open Discussion Forums (non model specific) |
15 |
Mar 15, 2015 Reply by Wayne Tyson |
Therm-o-bobI was wondering how many 912 flyers were using a therm-o-bob and what your thoughts were? Started by Joey Cirri in Open Discussion Forums (non model specific) |
3 |
Mar 15, 2015 Reply by Victor Seder |
Oshkosh 2015Hello all, Trying to plan ahead this year on which days to go to OSH. Anyone know what evening the Zenith dinner will be? Thanks, Mike Started by Mike Chekal in Open Discussion Forums (non model specific) |
1 |
Mar 15, 2015 Reply by Timothy Aanerud |
SOLD - Cruzer plans for sale!CH750 CRUZER plans in excellent condition. Builder #10130. $425 plus shipping. Started by Trevor Leslie in Classified / For Sale Postings |
3 |
Mar 13, 2015 Reply by Trevor Leslie |
Wing rear Chanel secure pointSo, to secure the rear Chanel to the extruded bracket, a hole has to be cut in the lower skin. I have seen notches from the inner trim edg… Started by Richard Simmons in Open Discussion Forums (non model specific) |
1 |
Mar 10, 2015 Reply by Chumphol Sirinavin |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
