Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,812)
| Discussions | Replies | Latest Activity |
|---|---|---|
750mixer bearing supportWhich way is the bearing suppose to go long side up or down Two bolts are of center Started by Peter Ratcliffe in Open Discussion Forums (non model specific) |
2 |
Jun 13, 2011 Reply by John Weigel |
ZENITHS to OSHKOSH Banquet UpdateHi Everyone, Things are going very well with the Zeniths to Oshkosh campaign. Almost too well! So I'm writing to give you some more informa… Started by Joe Scheibinger in Open Discussion Forums (non model specific) |
0 | Jun 9, 2011 |
Glass vs Steam Gauge "Basic" Panel?It'll be some time before I need an instrument panel for my CH750, BUT, just like engines, there's a LOT of choices as far as instrumentati… Started by John Austin in Open Discussion Forums (non model specific) |
3 |
Jun 9, 2011 Reply by Chris Aysen |
Lowrance Airmap 2000C connect to DynonI have been to the Dynon forum site for connection info of the 2000C to the D100 and it says "Hook the TX line from the data cable to pin 2… Started by Mike Miller in Open Discussion Forums (non model specific) |
6 |
Jun 9, 2011 Reply by Mike Miller |
NEW MEMBERHello everybody! I am a Mexican national of Mexican-American descent living and working permanently in Ecuador. I was trained as an arc… Started by Francisco URSÚA-COCKE in Open Discussion Forums (non model specific) |
1 |
Jun 8, 2011 Reply by Chumphol Sirinavin |
compressing gas springsDoes anyone have an idea on how to compress the gas springs that hold the XL/650 canopy open? It looks like the end one the fuselage needs… Started by Jim Belcher in Open Discussion Forums (non model specific) |
6 |
Jun 5, 2011 Reply by Theodore Richard Haller |
Best corrosion protection method for steel parts?I recently purchased a partially-completed 750 kit. I'm well in to the fuselage build and using Cortec, but have yet to have to install any… Started by John Austin in Open Discussion Forums (non model specific) |
4 |
Jun 1, 2011 Reply by Jan van 't Schip |
Bad rivet holesFirst of all, what a great site. I cleco'd my 650 rudder together last weekend. While drilling rivet holes into one of the ribs, my drill… Started by Patrick Underwood in Open Discussion Forums (non model specific) |
6 |
Jun 1, 2011 Reply by Brian Fitzpatrick |
WANTED: Lycoming installationI am starting to cobble together peices for my Lycoming O-235L2C installation. It's easier to list what I HAVE; one engine one engine mount… Started by brad cohen in Classified / For Sale Postings |
2 |
Jun 1, 2011 Reply by Ken Elias |
Return to the foldFor anyone who has followed my build log and thought I had given up, I would like to let you all know my building has resumed. Tips for a f… Started by Glenn Andressen in Open Discussion Forums (non model specific) |
3 |
May 31, 2011 Reply by Glenn Andressen |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
