Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,812)
| Discussions | Replies | Latest Activity |
|---|---|---|
Trimming lower CowlingHi folks. I and my Pardner Bill Marvel are in the final assembly stages of assembly on our 801. We installed a o360 with a constant speed p… Started by Robert Caskey in Open Discussion Forums (non model specific) |
1 |
Jun 2, 2010 Reply by Robert Caskey |
Rotax 912uls wrong rotationEngine was inadvertantly rotated in wrong direction two revolutions. Will this damage the engine. and is there anything that must be done i… Started by Thomas Richardson in Open Discussion Forums (non model specific) |
7 |
Jun 1, 2010 Reply by Thomas Richardson |
Solid rivets questionI am not familiar with solid rivets in the larger sizes. Can the upgrade solid rivets be set with a hand squeezer, or must they be driven w… Started by Jay Bannister in Open Discussion Forums (non model specific) |
9 |
May 28, 2010 Reply by Phill Barnes |
CH300 Build Kit For Immediate SaleFOR IMMEDIATE SALE – $9500/ Make offer! Zenith CH 300 Build Kit with plans, instructions, and materials is 40- 50% complete. Left wing comp… Started by Bruce B. Brown in Classified / For Sale Postings |
0 | May 28, 2010 |
Oops!While back-drilling holes for the top skin of the fuselage of my 650 I accidentally missed one of the existing holes on the back bulkhead a… Started by Jerold Ebke in Open Discussion Forums (non model specific) |
10 |
May 27, 2010 Reply by Jerold Ebke |
No Canada Zenair Fly inWhy is there never a Canada all Zenair Fly-in?. Is the support lost in Canada?. Is this not the country where the Zenairs started? Started by Marcel de Vlieger ( "the Flyer") in Open Discussion Forums (non model specific) |
10 |
May 23, 2010 Reply by Marcel de Vlieger ( "the Flyer") |
Rotax 912 Fuel Pump - Safety AlertAnyone flying a Rotax 912 series engine should pay attention to the "Mandatory SB-912-53" service bulletin. It deals with the replacement o… Started by Bob McDonald in Open Discussion Forums (non model specific) |
3 |
May 22, 2010 Reply by Bob McDonald |
Scratch built parts needed from ZACDoes anyone know how much ZAC charges for the fuselage longerons , aluminum streamline struts and bubble doors? I fly a longwing 701, but w… Started by Jerome Shepard in Open Discussion Forums (non model specific) |
3 |
May 13, 2010 Reply by Robert Crawford |
EAA 748 Fly-In Breakfast 5-22-10 at Clearfield, PaHey all!! Just wanted everyone to know we are sponsoring an all you can eat pancake/omelet breakfast May 22 at KFIG (Clearfield, Pa.) from… Started by Dave Glass in Open Discussion Forums (non model specific) |
0 | May 10, 2010 |
Layout 750 sparHas anyone building from plans had a problem with the rivet layout and spacing where the doubler is on the spar. If so what was the correct… Started by David C Ruhe in Open Discussion Forums (non model specific) |
1 |
May 9, 2010 Reply by Ron Lendon |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
