Jay Carter's Discussions (128)

View

Discussions Replied To (35)	Replies	Latest Activity
"Put the nut toward the front. Manually pull the rivet slowly. As the rivet becomes s…" Jay Carter replied Feb 16, 2019 to nut under rivit, what to do?	6	Feb 17, 2019 Reply by Perry Delano
"Right side of the rear case." Jay Carter replied Jan 31, 2019 to lycoming O-235L2C oil pressure sensor location	3	Feb 1, 2019 Reply by Bob Pustell
"Are you saying the mount is 4mm wide? If so, pull it together and put in the bolts.…" Jay Carter replied Aug 19, 2018 to Jab engine mount	13	Mar 23, 2021 Reply by Roland Ashby
"Gary, I modified that tool and used it on my Lycoming powered Cruzer. Email…" Jay Carter replied Feb 25, 2018 to Bungee Install Tool for sale	2	Feb 25, 2018 Reply by Gary Welch
"When the rivets are installed it will not be nearly as loose. If you rivet the stabi…" Jay Carter replied Sep 2, 2016 to CH 750 Cruzer_Elevator Hinge_Hinge Pin Movement	2	Sep 2, 2016 Reply by Jay Carter
" Drill a new hole between existing rod end hole and the lightning hole. Helped t…" Jay Carter replied Oct 31, 2015 to Upgraded bellcranks	6	Nov 5, 2015 Reply by Bob Pustell
"Ed, E-mail me a phone# and time to call about your interior order. valleya…" Jay Carter replied Jun 25, 2015 to Beware of Flight Crafters llc. In Florida	3	Jun 26, 2015 Reply by Don Morrisey
"MGL ASX-1. 2 1/4 combination airspeed and altimeter. Works good for backup to Dynon." Jay Carter replied Jan 5, 2015 to altimeter airspeed indicator selection	7	Jan 19, 2015 Reply by John Austin
"If you haven't riveted the gear attach in place, remove it and make a #30 hole. Dimp…" Jay Carter replied Sep 14, 2014 to		just now
"Aren't these rivets supposed to go through the gear attach fitting and the seat supp…" Jay Carter replied Sep 14, 2014 to		just now

RSS

Welcome to
Zenith Aircraft Builders and Flyers

Sign Up
or Sign In

Or sign in with:

New from Zenith:

Zenith Planes For Sale

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

West Coast USA:

Pro Builder Assistance:

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Zenith Aircraft Builders and Flyers

Jay Carter's Discussions (128)

"Put the nut toward the front. Manually pull the rivet slowly. As the rivet becomes s…"

"Right side of the rear case."

"Are you saying the mount is 4mm wide? If so, pull it together and put in the bolts.…"

"Gary, I modified that tool and used it on my Lycoming powered Cruzer. Email…"

"When the rivets are installed it will not be nearly as loose. If you rivet the stabi…"

" Drill a new hole between existing rod end hole and the lightning hole. Helped t…"

"Ed, E-mail me a phone# and time to call about your interior order. valleya…"

"MGL ASX-1. 2 1/4 combination airspeed and altimeter. Works good for backup to Dynon."

"If you haven't riveted the gear attach in place, remove it and make a #30 hole. Dimp…"

"Aren't these rivets supposed to go through the gear attach fitting and the seat supp…"

New from Zenith:

Builder & Pilot Supplies: