Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
0-200A Alternator
Hi, Does anyone have any experience of the old continental 0-200A with I believe one of the first types of alternator, purchased the engine S/H from a 3rd party and it came with a type of rectifier I would associate with a dynamo rather than an alternator ,any help appreciated .
Regards,
Tom Carlin
Replies to This Discussion
-
Permalink Reply by Clint L Gosch on
-
Hi Thomas, can you share a picture of the generator and the regulator module? I have an o-200A with the older generator, if yours matches mine I'll dig around and try to find my wiring diagram.
- Attachments:
-
-
20180602_193731.jpg, 2.5 MB -
20180530_114758.jpg, 2.1 MB
-
-
-
Hi Thomas, see attached document. My setup is wired up very similar to the diagram on page three. I did not install the indicator light. Good luck!
- Attachments:
-
Permalink Reply by Thomas carlin on
-
Appreciate your reply Clint .
Best Wishes,
Tom Carlin
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Custom Upholstery Kits for your Zenith Aircraft:
Zenith Vinyl Upholstery Kits
Zenith Apparel from EAA:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
© 2023 Created by Zenith.Aero.
Powered by
