Good morning, 

   Just beginning my build on 750 STOL.  Needing to acquire some 2 inch square tubing and wondering if anyone can save me some time by informing me of the minimum length and number of pieces of 2 inch square tubing needed throughout the build process.  I’m sure I could figure it out by going through all of the documentation but I was hoping a quick answer would be available by some experienced builders on here.

 Thanks in advance,

Kyle Wilcox

Views: 151

Reply to This

Replies to This Discussion

I've been using 4 foot sections to match the width of my table. 6 sections have been adequate.

Thank you David


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Homecoming Tshirt:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2023   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service