Good morning, 

   Just beginning my build on 750 STOL.  Needing to acquire some 2 inch square tubing and wondering if anyone can save me some time by informing me of the minimum length and number of pieces of 2 inch square tubing needed throughout the build process.  I’m sure I could figure it out by going through all of the documentation but I was hoping a quick answer would be available by some experienced builders on here.

 Thanks in advance,

Kyle Wilcox

Views: 160

Reply to This

Replies to This Discussion

I've been using 4 foot sections to match the width of my table. 6 sections have been adequate.

Thank you David

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service