Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Beginning build, square tubing needs
Good morning,
Just beginning my build on 750 STOL. Needing to acquire some 2 inch square tubing and wondering if anyone can save me some time by informing me of the minimum length and number of pieces of 2 inch square tubing needed throughout the build process. I’m sure I could figure it out by going through all of the documentation but I was hoping a quick answer would be available by some experienced builders on here.
Thanks in advance,
Kyle Wilcox
Replies to This Discussion
-
Permalink Reply by David Larson on
-
I've been using 4 foot sections to match the width of my table. 6 sections have been adequate.
-
Permalink Reply by Kyle Wilcox on
-
Thank you David
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
