landing gear paint

I am getting ready to install the (CH601-HD) landing gear.

The steel struts need some coating for corrosion protection.

I looked a chrome plating, but the cost is a bit too much (close to CA$500, including treatment against embrittlement).

I saw comments about a 2 part epoxy aerosol, but it seems to be (1) hard to find and (2) pricey...

(Rust-Oleum Vk9300 System 2K Epoxy)

There's the possibility of powder coating it... I expect the price would be more reasonable than plating.

Any suggestions? (I do not have a compressor, so spray painting is limited to aerosol cans).

Views: 927

▶ Reply to This

Replies to This Discussion

Permalink Reply by Dan Hill on February 25, 2018 at 7:04pm

don't know about the availibility in Canada, but Eastwood offers the 2 part epoxy in aerosol here in the US if that is the route you decide on. Dan.

Permalink Reply by Jan Eggenfellner on February 25, 2018 at 7:33pm

Powder-coating is the way to go on these.

Or, you can paint but forget about aerosol stuff without a mixed in hardener.  

Permalink Reply by Lee Engel on February 25, 2018 at 7:51pm

I had mine powder coated in Port Huron Michigan for less than $100 US..

Permalink Reply by Chris Beebe on February 25, 2018 at 8:12pm

I also went with powder coating. Doesn't cost much and lasts for years to come.

Permalink Reply by Oliver Reik on February 25, 2018 at 9:07pm

We decided to to paint all steel parts with a good epoxy primer an top coat. We then rinsed all accessible cavities's with SEM 39574 Rust Preventer Cavity Wax.

The reasons why we decided against powder coating were that it can't be repaired, that the bond with the metal is not as strong as with an epoxy primer what makes it easier for rust to creep under it and that it also adds quite a bit of thickness, what can be problematic in some areas.

Personally, I would only powder coat parts, where wear is a bigger concern than corrosion, like the rudder pedals.

Oliver

Permalink Reply by Carlos Sa on March 3, 2018 at 9:01am

Thank you all for your comments, much appreciated.

I still haven't decided, but I have already powder coated some parts (canopy frame, pedals, firewall), so I know how tough the material is.

I am leaning that way, unless I find someone nearby that can do the painting for me.

Carlos

Permalink Reply by Charles Miller on March 3, 2018 at 5:20pm

It's been a while since I purchased any and I know it costs more than paint. The product is made by POR 15 chassis coat black in a spray can. It's tough and coats very smoothly.  7 years on my motorcycle forks and looks as good as the day I painted them. I used this on parts that I didn't want to powder coat. 

Permalink Reply by Carlos Sa on March 4, 2018 at 9:57am

Thanks for the tip, Charles

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service