Online Community of Zenith Builders and Flyers
I am having a varying gap in my slat at the top. Ranging from 17mm to 22mm from end to end. Is this ok? This just bolting them on without any modification to the holes.
what are you guys seeing and is this acceptable.
thanks
Tags:
FWIW, I've seen much more varying gaps and they all seem to fly just fine. I think all of the variances cancel each other out! LOL!
John
N750A
I wouldn't worry about it. I've seen varying slat gaps, forward swept wings, rearward swept wings, small variations in flaperon rigging, they all seem to fly just fine.
Just don't go supersonic. That would result in total protonic reversal.
You should be fine.
And don't cross the streams........ It would be bad.... :)
Oops! Forgot the most important advice ... chant the mantra: "It's not a F-16, it's not a F-16!" :)))
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).