Online Community of Zenith Builders and Flyers
Added by John Marzulli 3 Comments 6 Likes
Posted on February 16, 2018 at 12:46pm 5 Comments 0 Likes
I am considering putting together another gathering during the Arlington Fly In.
Would anyone be interested?
This would be at KAWO (Arlington, WA) during July 6, 7, and 8.
Activities could include a Zenith Fly Out. We will also have access to a runway for flight activities during the fly in.
Posted on December 30, 2017 at 1:58pm 1 Comment 9 Likes
I wanted to finally reveal an electronics project that some of you may want to build.
It is cold outside, the engines need to be warmed for long periods of time, and no one wants to go to the hangar and wait for hours while the engine slowly soaks in heat.
This solution is called the “Hangar Buddy”, and it is based on an incredible project by Maria DeGrazia. You may have seen it in the EAA Experimenter under the name “piWarmer”. This is my version that has been…
ContinuePosted on July 13, 2016 at 3:00am 5 Comments 8 Likes
The inaugural year of the West Coast Zenith Fly - In is now in the books, and it was a success.
This event was held in Arlington, WA during the annual (and great) Arlington Fly In.
Despite very threatening weather, we had seven zeniths show.
A 750, a 601, an 801, and four 701s. Two of the planes were from California!
We also had about a dozen active builders join us, which may be the most rewarding part of any fly in. Ideas and tips…
ContinuePosted on April 14, 2016 at 2:55pm 18 Comments 9 Likes
It has become old hat to complain about the decline of General Aviation. We can rant about the costs, how airports have been fenced off, or any number of ailments.
This tract is a little about one of those symptoms, a little about how to make flying more fun, and about making flying safer.
There is a vicious circle, a fully developed spin that we must recover from. Something that used to be ordinary, but is now feared.
Something that is fun, but potentially…
Posted on January 24, 2016 at 11:56pm 4 Comments 5 Likes
I have spent the past five months tracking down a strange problem. It was a problem that confused me, A&Ps, and lots of very smart people.
It was a problem that sent me down a path of inspections, repairs, experimentation, and lots of test flying.
It was a problem that was ultimately solved by two cents with of zipties.
When I pulled back the throttle on my 912ULS powered (550 hours on the engine) 701, the engine would start to get rough around…
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
Comment Wall (21 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Hello,
My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.
Michael Mccarthy.
hi john i'm just about ready for paint and will be going for the L4 type , I started with ppg because it has a self etching primer but the guy at the paint store say he cant mix the olive drab color. could you tell me what paint you used, ore the mix formula for the O.D.
Thank Ron
John,
My wife and I were one of the few who made it to Arlington this year and we did so with hopes of getting a look at some Zenith planes. You were very helpful and let both me and my wife sit in your plane and bug you with a ton of questions. My wife and I left there and much to my surprise, she said to me "We need to get a Zenith" OK...twist my arm!!!!
Just my way of saying thank you.
Charlie and Sandi Rosenzweig
Longview, Wa.
ps. your videos and pictures are amazing. I think I have looked through them all more than once!
Hi John. I recently bought a 701, with 912uls. Do you think I could get a copy of your poh? Austin Crowe
hi john
i was told end of next week for the paper work to get to me .thats like 9 more sleeps .
hi john
for the poh i just customized it for my plane , things like the engine and the prop and some of the maintanance stuff that is in reguard to my high performance ea 81 subaru engine .
in canada we have to include what they call out of phase items such as you elt and encoder maintanace as well. I amagine you have to include those items also somewhere .the inspector is comming tonight at 4pm to look at the boots i had to install,and then i think i have to wait for the final pc of paper from transport canada before i can legally fly .hopfully it will be here for the end of next week .
thanks and keep up with the cool vidio ,it keeps people motivated to cary on with building
talk soon C-GHWA
hi john
i got the cargo net at canadian tire and the seats are from walmart
thanks for the poh i used most of it .
John
Have you ever had your aileron controls seem to be heavy during higher winds aloft? Control is smooth and effortless on the ground, but in mid-day flight during periods of 10mph or less winds it seemed harder today.
Joe
Thanks for accepting my friend request. I also want to thank you for your wonderful videos.
View All Comments