charlie rosenzweig
  • Male
  • Magnolia, KY
  • United States
Share on Facebook

Charlie rosenzweig's Friends

  • LARRY TRAMEL
  • Joshua Bardell
  • Randy Hayes
  • Scott Matthews
  • Tim Keaten
  • Mike York
  • Michael Leamy
  • Jonathan Fay
  • Mark Baenen
  • Carl Orton
  • Fred Williams
  • Terrence "Dr. Terry" Hall
  • Phil Cook
  • John A. Minatelli
  • Matthew Walsh

charlie rosenzweig's Discussions

WTB Center Stick (Cruzer)

Started Jan 13 0 Replies

Want to buy a used Y stick for a Cruzer.Charlie 360-703-814 four.Continue

Viking steel bungee

Started Nov 4, 2023 0 Replies

I don't know if anyone has been able to use a Viking Steel bungee with a Corvair mounted engine but I felt it was potentially going to be too close to the top of the engine mount for my comfort. …Continue

SOLD - Viking steel bungee new for sale $175 plus shipping

Started this discussion. Last reply by charlie rosenzweig Nov 8, 2023. 2 Replies

SOLD - I have a new never installed Viking Aircraft steel bungee kit for sale.   It came with a Cruzer kit I bought but I cannot use it with my Corvair engine mount.   It is complete except I do not…Continue

Closed, disregard,WTB: Wanted VDO Fuel Sender 160mm long.

Started Jul 2, 2023 0 Replies

Looking to buy a VDO fuel sender 160mm long.  Model 224-011-000-160G(X).Like this pic. Charlie 360-703-814Four.Continue

 

charlie rosenzweig's Page

Latest Activity

charlie rosenzweig posted discussions
Nov 4, 2023
Bert Sparrow left a comment for charlie rosenzweig
"Hi Charlie - thanks for liking my paint job.  Glad to know other folks as I really designed that myself with influences from existing Zenith Planes and Carbon Cub plus others, to all come together to what I wanted.  It was painted by Leon…"
Jul 13, 2023
charlie rosenzweig posted a discussion

WTB: Wanted VDO Fuel Sender 160mm long.

Looking to buy a VDO fuel sender 160mm long.  Model 224-011-000-160G(X).Like this pic. Charlie 360-703-814Four.See More
Jul 2, 2023
charlie rosenzweig posted a discussion

Vinyl wraps more than 4 years old???

I would like to hear from folks who have at least 4 or more years on their vinyl wrapped plane.   How is it holding up?     Would you do it again?   What brand of wrap?   Where did you buy it?   Suggestions for new inexperienced folks?See More
May 16, 2023
charlie rosenzweig posted a discussion

Thanks guys

Just wanted to give a shout out to all who posted on this thread.5 years later it is still very helpful to us who are just now beginning this taskCharlie See More
May 10, 2023
John A. Minatelli left a comment for charlie rosenzweig
"Azalea Aviation located in Georgia.  They have plenums for the Corsair engines they sell. john"
Apr 10, 2023
charlie rosenzweig posted a discussion

Anyone know Ben KNox Wooster OH? Or know of his Zenith builds?

I have a chance to purchase a scratch built Cruzer that Ben Knox built back in 2016.I would appreciate to hear from anyone who knows Ben or of his workmanship to call or email me.I have a message in to him on this forum, I have not heard from him, and I do not have his phone number. My number is 36zero-70three-814four.  my email is charosenz-at-msn.com Charlie RosenzweigMagnolia KY.  See More
Feb 21, 2023
charlie rosenzweig posted a discussion

Anyone installed the 150 Viking in their Zenith?

Has anyone installed the 150 HP in a Zenith yet?    I am curious if you used the factory cowl, or a Viking Cowl, or ?If so, pictures would be appreciated.Thanks. Charlie Rosenzweig See More
Oct 19, 2022
charlie rosenzweig posted a discussion

Fuel Design: Risk of sucking air from one tank while in a steep turn

There are several solutions to prevent a fuel system from sucking air from a fuel tank while in a steep turn when the fuel level is low.   This has been a hot debate on other forums.I am curious to hear from folks who are actually flying their planes on which design you use to address this risk.  1) Header tanks?2) Check valves?3) Limit fuel selector valve to only use R or L tank but not both?4) None, I use "both" on my selector valve and do not have a header tank and have not had any…See More
Sep 26, 2019
Richard Jones left a comment for charlie rosenzweig
"i will gladly share my experiences of my CH-601 with the Corvair engine and the Viking 130 engine with a Whirlwind prop Dick Jones rljones601@yahoo.com"
Jun 22, 2019
charlie rosenzweig posted a discussion

using leaded fuel with O2 sensor

While this is not necessarily unique to Viking engines I thought it would be as good a place as any of the forums to ask the following questions.Since most newer automotive engine systems use O2 sensors and knowing that leaded fuel fouls O2 sensors, (given that we will occasionally have to use leaded fuel) I would be curious to know:1) How long (hours) before the O2 sensor goes bad?2) What are the signs that the sensor is going bad?3) Is you experience based on the narrow band sensor or the…See More
May 28, 2019

charlie rosenzweig's Photos

  • Add Photos
  • View All

Profile Information

Aircraft Model
STOL CH 701, STOL CH 750, CH 750 Cruzer
Project Status
Nearly done
Building From
Kit
Engine installed (or plan to install)
Corvair
Building Experience
Have already built an airplane
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
Purchased a partially completed Cruzer. It came with a 3.0L Corvair. I have previously built and flown a Turbo Honda RV6A.
Home Airport (ie. KMYJ)
M20

Comment Wall (16 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 7:51am on July 13, 2023, Bert Sparrow said…

Hi Charlie - thanks for liking my paint job.  Glad to know other folks as I really designed that myself with influences from existing Zenith Planes and Carbon Cub plus others, to all come together to what I wanted.  It was painted by Leon at Alabama Plane Painting about an Hour south of Montgomery.  He is seriously backlogged.  If you haven't seen these, maybe they will show the paint job even better:

https://youtu.be/Z_4qJLlaAEQ

 

https://youtu.be/uA2et0XiNqE

Thanks again, Bert

At 8:20pm on April 10, 2023, John A. Minatelli said…

Azalea Aviation located in Georgia.  They have plenums for the Corsair engines they sell.

john

At 8:28am on June 22, 2019, Richard Jones said…

i will gladly share my experiences of my CH-601 with the Corvair engine and the Viking 130 engine with a Whirlwind prop

Dick Jones

rljones601@yahoo.com

At 2:41pm on November 7, 2018, Patrick Hoyt said…

About 25 hours on the Viking 130 engine at this time.

At 1:27pm on November 7, 2018, William C Cooper II said…
Charlie, got your note. PM me and I will try to answer your questions about the cooling system
At 2:27am on April 15, 2017, Terrence "Dr. Terry" Hall said…

I appreciate your comment, I attempt to document this unique experience as a novice builder and I continually learn from my mistakes and from others. I have only been at it since first Zenith class in 10/16. But it truly is educational, recreational and of course humbling. My EAA tech advisor told me that at least it keeps him out of the tavern. 

Terry Hall

At 8:37am on March 27, 2017, Kyle D. Voltz said…

Charlie, I accidentally clicked the ignore button on your message. I think I added you now though.  

Anyways, I helped with the 750 STOL build but not the Cruzer so I dont think I can weigh in on that part!  Feel free to email me at kvoltz@eaa.org

At 4:25am on February 15, 2017, Wayne Clagg said…

It wasn't bad, I filled out the appropriate paperwork and submitted it and it went pretty smooth from there. They look at the coordinates and verify that it wont be a navigation hazard to other airports and such. The only issue I did have was with the lady who made the initial contact via phone, she obviously didn't want to deal with it. I used the garmin in the plane for the lat long coordinates and she was pretty rude about that, wasn't acceptable to her and pretty much called me a dumbass. She changed the numbers to what she said they should be, rounded them off, and now the field shows up across the river a few hundred yards away but its no big deal. I still have the forms and paperwork so when you get ready I'll dig them out so you'll know what you need. 

At 6:32am on February 14, 2017, Wayne Clagg said…

give me a shout if I can be of any help. Stop by and visit sometime if you're ever in the area. 12WV is the identifier at my farm fieled.

At 7:48am on January 23, 2017, Conrad Watters said…
Thanks Charlie, it was a great trip through the mountains to the west coast. I am planning a longer trip for this spring...from Ottawa, across to Calgary then up to the Yukon. ( about 8000 miles). The ch 750 is a great aircraft for its mission but certainly 'takes its time' for longer adventures. Conrad
 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.