David Krakowsky
  • Male
  • Weirsdale, FL
  • United States
Share on Facebook

David Krakowsky's Friends

  • Steve McIntosh
  • cole king
  • Brad T Throckmorton
  • Donald Mascol Jr
  • Tom Clouse
  • Jim Kramer
  • Thomas Brannan
  • gar shoemaker
  • Mark Stevens
  • Chuck Hughes
  • Ian Robb
  • Ramesh Nori
  • Dale Walters
  • Robert B Jamieson
  • John Packer

David Krakowsky's Discussions

Uavionix Tail Beacon TSO

Started this discussion. Last reply by David Krakowsky Oct 7. 2 Replies

I have a brand new in the box Uavionix Tailbeacon, TSO’d for experimental or certified aircraft.Retail $2095Selling for $1800Went  with another ADSB system.Replaces your tail light, two wires and you…Continue

Uavionix Tail beacon on a 601XL/650

Started this discussion. Last reply by David Krakowsky Oct 7. 2 Replies

I just installed a Uavionix Tail beacon on my 601XLBi am having problems with getting acceptable FAA reportsUavionix has been helpful trying to resolve the issue.anyone here have positive or negative…Continue

Strut lifts

Started Sep 8, 2023 0 Replies

It’s been a few years on my 60 pound lift struts on my 601XLB, so I decided to replace them. Wow! What a difference, you don’t notice the slow degradation.The new struts are like power assist in the…Continue

Clarity aloft for sale

Started this discussion. Last reply by David Krakowsky Mar 22, 2023. 2 Replies

I have an almost new Clarity Aloft, purchased September 2022, used 10 flights, factory case, extra ear tips. New price $525my price $400 shipped Continental USmight trade up for a David Clarke X-one,…Continue

 

Welcome, David Krakowsky!

Latest Activity

David Krakowsky posted a discussion

Uavionix Tail Beacon TSO

I have a brand new in the box Uavionix Tailbeacon, TSO’d for experimental or certified aircraft.Retail $2095Selling for $1800Went  with another ADSB system.Replaces your tail light, two wires and you have ADSB out. David Krakowsky N601XPSee More
Oct 3
2 Comments
David Krakowsky posted a discussion

Uavionix Tail beacon on a 601XL/650

I just installed a Uavionix Tail beacon on my 601XLBi am having problems with getting acceptable FAA reportsUavionix has been helpful trying to resolve the issue.anyone here have positive or negative experience with the Tailbeacon?im not sure if its my plane/installation or a defective tail beacon it’s not getting a very good gps signal.before I send it back I’d like to hear your experience with a tail beacon.thanks Dave N601XPSee More
Sep 18
2 Comments
David Krakowsky posted a discussion

Strut lifts

It’s been a few years on my 60 pound lift struts on my 601XLB, so I decided to replace them. Wow! What a difference, you don’t notice the slow degradation.The new struts are like power assist in the opening of the canopy.if it’s been a while change your lifts on your canopy. Dave N601XPSee More
Sep 8, 2023
0 Comments
David Krakowsky posted a discussion

P-Mag wanted

Looking for a P-mag 114C for a Continental O-200DaveSee More
Aug 24, 2022
0 Comments
Donald Mascol Jr left a comment for David Krakowsky
"Hi David, I have a 2007 factory built 601 XLi with the sensenich 68x57 prop which seems to have too much pitch. I can get 2330 Static RPM and have not seen anything over 2600-2650 RPM max throttle level flight. I ordered a 3 bladed prop from Warp…"
Oct 6, 2021
David Krakowsky posted a discussion

Trade ADS B in and out for Garmin 660

I have a used Skyguard vision pro ADS B in and out, legal for experimental aircraft, current model withexcellent factory support for a Garmin Aera 660 with AirGizmo panel mount and wiring cable.the vision pro requires two external antennas and a 3 amp breaker to install.also looking for a P-mag or Surefly ignition for a 0-200DaveSee More
Oct 1, 2021
4 Comments
David Krakowsky posted a discussion

Icom A21 portable Nav/Com

Icom A21 Nav Com portableused, very good condition, includes alkaline battery pack, 12 volt cigarette plug cord, rubber antenna$150 shipped 48 statesDavedothetime@hotmail.com561-374-3285email for picsSee More
Jul 15, 2021
2 Comments
David Krakowsky posted a discussion

Dynon D180 fuel pressure sensor

I have a VDO fuel pressure sensor I need to replace0-30 psi, Dynon lists the part # 100411-00anyone know the VDO part number, resistance, etc?called Dynon, left voice mailDaveSee More
Apr 30, 2021
1 Comment
David Krakowsky posted a discussion

601XLB airframe

Just putting this out there to see if there is any interest.a buddy of mine has a flying, painted, kit built 601XLB, I’m interested inpurchasing it for the Continental 0-200. He’s too old to keep flying, he built it.Anyone out there interested in purchasing the airframe less the motor?I'm thinking like $10,000. For the airframe.it has a Dynon D100 and an Icom radio.Transponder (not sure make/model but I will find out), don’t think it has ads bcomments appreciated.location Southeast…See More
Apr 17, 2021
2 Comments
David Krakowsky posted a photo
Thumbnail

5284ED07-3588-41FE-9A45-9FC4A68E32E8

New milestone today!800 hours on the Hobbs.
Mar 4, 2021
0 Comments
David Krakowsky posted a discussion

ADS B Cheap!!!

No Description
Feb 2, 2021
58 Comments
David Krakowsky posted a discussion

Home built help DVD’s 601/650

I have a set of  601/650 Homebuilthelp.com DVD’s, all original, not copies.Fuselage part 1, disk 1 and 2Fuselage Part 2, disk 1 and 2 Fuselage part 3, disk 1 and 2Wing construction disk 1 and 2, disk 1 doesn’t work on my Mac, may work for you or you can try getting a replacement from the manufacturer, no visible damage.CH601XL upgrade 1 diskCanopy  Conversion 650 canopy on a 601 airframe 1 disk Electrical wiring 101     1 disk Building a glass panel 1 diskTotal of 12 disks all tested and play…See More
Jan 23, 2021
9 Comments
David Krakowsky posted a discussion

Emag P114C or Surefly 4P wanted

Still looking for a Emag 114C for a O-200or a Surefly 4Pif you have one on the shelf and want to turn it into cash, contact me.Davedothetime@hotmail.comSee More
Nov 28, 2020
0 Comments
David Krakowsky posted a discussion

601XL canopy question

Noticed a new crack in my canopy today at the leading edge of the canopy about two inches long not my first crack, I did some plastic repairs on my first which was there when I bought the plane in 2014.my plane was factory built by AMD in Georgia.it a s held to the frame by pop rivets. Don’t know if the screws will fit the pop rivets holes if I want to use screws.i have the plans and it shows screws hold the canopy to the frame so question 1, anyone have a canopy they want to sell? anyone know…See More
Nov 13, 2020
6 Comments
David Krakowsky posted a status
"Special thanks to Tom Brannan for answering my request for a backup D180"
Oct 25, 2020
0 Comments
David Krakowsky posted photos
Thumbnail
Thumbnail
Thumbnail
Oct 12, 2020

Profile Information

Aircraft Model
ZODIAC CH 601, ZODIAC XL
Project Status
Flying
Building From
Purchased finished aircraft
Engine installed (or plan to install)
Continental O-200
Building Experience
Have worked on airplanes before
Flying Experience
Private Pilot, Sport Pilot (or Ultralight)
Building and Flying Info / Your Profession / Other Background Info
Bought N183AM(now 601XP)AMD factory built 601XLB November 2014, pilot since 1991, This is the fifth aircraft I have owned. I am retired law enforcement. I am a private pilot, high performance endorsement, tailwheel endorsement. Flying light sport now. Plane is registered as a ELSA and I have the repairman's certificate.
Home Airport (ie. KMYJ)
97FL Loves Landing Airpark

David Krakowsky's Photos

  • Add Photos
  • View All

David Krakowsky's Blog

ADS-B installed

Posted on June 11, 2017 at 9:32pm 3 Comments

Installed a Skyguard ADS-B in and out system with AHRS
Install took two days, first day brackets and antennas.
Second day power, data, switch, breaker, cables.
Not a hard install, being a Amatuer radio operator probably helped. Don at Skyguard has great customer support.
Got an FAA report, all ok.
There are some great new products coming out there for experimental aircraft. Feel free to contact me if you have any questions about doing your own install.

N601XP

Posted on February 5, 2015 at 2:00pm 3 Comments

My plane is a factory built AMD Zodiac 601XLB

Attended Rainbow Aviation Repairman 16 Hour course in Lakeland Florida, January 2014

Purchased November 2014, changed SLSA Certificate to ELSA January 2015

Received repairman certificate for the airplane February 2015

Plane has a Dynon D180 with AOA Option, Garmin SL40 Com radio, Garmin digital Transponder, Garmin 396 with air gizmo mount, Garmin Audio Panel.

Approximately…

Continue

Comment Wall (4 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 2:36pm on October 6, 2021, Donald Mascol Jr said…

Hi David,

I have a 2007 factory built 601 XLi with the sensenich 68x57 prop which seems to have too much pitch. I can get 2330 Static RPM and have not seen anything over 2600-2650 RPM max throttle level flight. I ordered a 3 bladed prop from Warp Drive (ground adjustable) which I think you mentioned you had also done. Have you noticed a difference in performance? 

Thank You

At 12:03pm on February 9, 2017, Jeff Garrett said…
David
The shippinp will be $20.00. Yes you will be happy with the fit and finish. I just got finished making new molds for these parts. You will need to scuff,prime,and paint them of course.
Please give me a call when you can 502-536-3481
At 6:03pm on June 18, 2016, Wayne Tyson said…

Thanks, David. If I can reciprocate in any way, let me know.

WT

At 2:39pm on March 6, 2015, Normand Lambert said…

Hi David,

Don't forget to take pictures and post them here ! We enjoy seeing what other builders are doing... Welcome to the gang !

Norm

CH701sp

 
 
 

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service