Jim Smith
  • Claremore, OK
  • United States
Share on Facebook

Jim Smith's Friends

  • Rodney Wren
  • Tony Butterhof
  • Dr. Edward L. Olds III
  • Bruce Cruikshank
  • joseph hanz
  • Zenair News
  • Mike Schlichtman
  • Sebastien Heintz
  • Zenith.Aero
 

Jim Smith's Page

Profile Information

Aircraft Model
STOL CH 750
Project Status
Flying
Building From
Kit
Building Experience
No Experience
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
Retired, flyer since 1976. Instrument rated with over 50 hours to date in my Zenith CH750. Suffering withdrawal from building the aircraft and may well build another.

Jim Smith's Photos

  • Add Photos
  • View All

Jim Smith's Blog

CH750 is nearly in the air

Posted on April 14, 2009 at 6:41am 4 Comments

A big day on April 13th as we pulled the CH750 out of the hangar and started the engine. The 0200 roared to life and sounded like a million bucks. We ran the engine for about 15 minutes, then shut down and back in the hangar. The last remaining items are so simple (and small). I have three bugnuts coming from Spruce to attach mixture, carb heat and cabin heat. I safety wired everything last night. Once the bugnuts are installed it's time to weigh, complete weight and balance exhibits and submit… Continue

Comment Wall (20 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 4:46am on June 18, 2021, Michael Mccarthy said…

Hello,

My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.

Michael Mccarthy.

At 6:40pm on December 15, 2010, KENNETH DRUMHELLER said…

Jim:

Thanks for your imput.  Having a plane painted can get expensive.  Yours looks great!  Pick out a few colors, paint all the sub-assemblies different colors, add graphics and you have a one of kind that looks great and doesn't cost a fortune. thx

                                                                                            Ken

At 8:19am on December 15, 2010, KENNETH DRUMHELLER said…

Jim:

I was just admiring the pictures of your completed CH 750.  Where did you purchase the graphics for the sides and cowling.  Curious if you purchased them locally or found a site on the internet. thx

At 9:13pm on July 22, 2010, Neil Corella said…
Hey Jim.    What was the empty weight?  What engine and was the weight with paint?   Thanks.  Neil
At 7:57am on June 25, 2010, Stevie Chitwood said…
Hey Jim,
Just wondering if your 750 is in the air? Looking foward to visiting with you again soon.
Have a great day! Stevie
At 6:37am on April 30, 2010, Stevie Chitwood said…
Thanks, Billy and I are glad to be part of the zenith club.
Have a great day. Stevie
At 6:57am on April 6, 2010, Jim Smith said…
Hi Bruce, I do not have a fuel pump and gravity feed has worked great. I actually bought an electric in line pump when I was building her so I would have guaranteed line pressure but I realized that the pump defaulted "closed" if there was an electric failure. That did it for a pump. I decided to go with the old "Cessna" gravity system and I haven't had even an engine "burp".
At 12:00am on April 6, 2010, Bruce Cruikshank said…
Jim, Are you using any kind of fuel pump or just a gravity feed fuel system?
Thanks, Bruce
At 6:21am on December 23, 2009, Clemens Kramer said…
Jim, my 750 will be inspected on the 9th of Jan. The DAR said we would have to fill out another form because the 750 kit is not on the approved list. This form is a series of questions and the yes's have to be 1 more than the no's (51%). Did you have to do this and if so could you inlighten me or email me a copy of yours so I could be consistent.
thanks
Clem clemkramer@yahoo.com
At 9:01am on November 9, 2009, Jim Derickson said…
Hi Jim, I am waiting for my 750 kit,( early Dec) I am leaning towards the o-200 for power. I have read your information about heating, did you get the o-200 to run at acceptable cht levels ? Also, what prop/ pitch combination did you go with. Any information would be helpful
Thanks, Jim Derickson
 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.