Ground adjustable prop.
On a ground adjustable 60 inch two blade prop on a Jabiru 3300, what's the ideal pitch setting, I have changed mine which produced high EGT'sSee More
Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Raymond Woods
- Bowral, NSW
- Australia
- Blog Posts (1)
- Discussions (39)
- Events
- Groups
- Photos (8)
- Photo Albums
- Videos
Raymond Woods's Discussions
Outboard fuel tank sensor
Started Feb 11, 2016 0 Replies 0 Likes
Has any one tried to remove the fuel gauge sensor from the outboard fuel tank [ long range ] tanks on a 601, I have an inspection hole between the two ribs.Continue
Raymond Woods's Page
Profile Information
- Aircraft Model
- ZODIAC CH 650
- Project Status
- Less than half
- Building From
- Purchased finished aircraft
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Private Pilot
- Building and Flying Info / Your Profession / Other Background Info
- Retired electrical engineer, have been flying for 40 years
Raymond Woods's Photos
Raymond Woods's Blog
Ground adjustable prop.
Posted on June 16, 2020 at 8:00pm 2 Comments 0 Likes
On a ground adjustable 60 inch two blade prop on a Jabiru 3300, what's the ideal pitch setting, I have changed mine which produced high EGT's
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (6 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
I've updated your entry on the map! Good luck with the final tests!
Thanks for the post. I keep meaning to arrange a visit to your place. I am working on the right wing right now. Onve that gets near complete I can start the left one. Hopefully should go a bit quicker. Just bent a new leading edge skin this morning and have it half installed. i have all this week off work so will press on with this.
I got this kit second hand and it had a Jabiru 3300S motor with it. Would e 8 years old now but never run. I am pulling it apart next week hopfully and converting it to solid lifter, through bold mod and hone the bors as thereis a little rust in there now. Doing this all through CAMIT. Plan to have that back together in the new year.
See how I go later this year with the left wing. Might have all the big parts done by the end of summer. Not saying which year though :)
What registration are you aiming for with your aircraft? RAAUS or Experimental?
Steven
Steven
How's the build going.
Chris
Hi Raymond
Are you the person that bought Eddie Seves zodiac?
Phill (Qld)
welcome aboard
Bowral. I am in Sydney with a Zodiac XL who's finished plane did you buy? what engine??
I should call in one time when passing to say hi..
Chris Sinfield