Online Community of Zenith Builders and Flyers
Learned today that I should not trust anything, esp. myself. Had to remove the nose skin on the rudder as I had incorrectly tucked it under the rear skin when it should have been installed on top. I have a new skill, rivet removing! Getting real good at…
ContinueAdded by Bradford Drown on June 27, 2019 at 5:00pm — 4 Comments
Since the Air in the Hawaiian islands contains high contents of salt and sulfur dioxide I decided to cortec the inside skins as well as a complete skeleton.
Added by Mickey R. Mathieson on June 26, 2019 at 1:02am — No Comments
Hi guys,
Completed the Rudder on Saturday, June 22nd. A good learning experience. I had to remove my first bad rivet due to a gap at the head. Sweated that out since it was one of the last rivets installed prior to completion. However, it went well and no damage to the skin. It was on the nose rib, forward skin so I didn't have to chase the rivet inside the rudder. Viewed the online video of the rudder build at the factory and I understand now why this kit will be a bit…
ContinueAdded by Bradford Drown on June 24, 2019 at 4:39pm — 8 Comments
Final assembly started. FA4B1A83-9637-40A7-B799-9A11F729C506.jpeg4D25D8E0-966E-44F2-B6D4-D99E6167E2DE.jpeg…
ContinueAdded by dschmaz on June 20, 2019 at 6:30am — No Comments
Quality Sport Planes (QSP) is hosting its annual Open House and Fly-In and retirement party for Doug Dugger on Saturday, June 22, from 10 am - 4 pm, at the QSP facilities at Cloverdale Municipal Airport (O60) in California:…
ContinueAdded by Zenith Aero on June 18, 2019 at 1:30pm — 4 Comments
Added by Jim and Amelia Isaacs on June 17, 2019 at 6:36pm — 2 Comments
I did a quick project update video for those who've been asking: https://evadot.com/2019/06/17/cruzer-update-video/
Added by Michael Doornbos on June 17, 2019 at 10:54am — 1 Comment
Added by dschmaz on June 17, 2019 at 9:06am — No Comments
Painted Cabin. Now Final Assembly can start
Added by dschmaz on June 17, 2019 at 9:04am — No Comments
Added by Jim and Amelia Isaacs on June 9, 2019 at 6:01pm — No Comments
Added by Jim and Amelia Isaacs on June 9, 2019 at 6:00pm — No Comments
Flat gasket for Gascolator A10580-T
Brake pads for a Grove 30-1 caliper
Soft filter for carburetor intake on a Lycoming O-235
Thanks.
Added by Dick Miles on June 7, 2019 at 9:57am — 1 Comment
The crate arrived today after a couple of adventures. Zenith shipped on May 24th and shortly thereafter the weather turned horrible. I got a notice of a 'weather delay' on my crate and waited to hear if it went flying without me. However, it arrived in NH on 06/01, and my house on 6/04. The second worry was the forklift puncture at the water line of the crate. (See photo). The fork did travel into the crate however, the only damage was a destroyed corner of the packing list envelope…
ContinueAdded by Bradford Drown on June 4, 2019 at 8:34pm — 2 Comments
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
1999
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).