Online Community of Zenith Builders and Flyers
July 30 2023
Riveted the elevator.
My riveter head is too large to get inside the cradle. I used a nut as a shim between the rivet head and the riveter.
Tuned the servo. To make the range +20 -40 as per the drawing I had to set the distance between the trim arm pins to 119mm. Very close to the recommended 116.
Changed the way the safety wires on the piano hinges are set. It is the way the safety wire is set on the Zenith demonstration plane. See the last image,…
Added by Alexander Samoylovich on October 29, 2023 at 4:37pm — No Comments
July 28 2023
Riveted the stabilizer tip ribs. Drilled the stabilizer tips. The angle between the tip rib and the stabilizer is good enough I believe.…
ContinueAdded by Alexander Samoylovich on October 28, 2023 at 5:36pm — No Comments
July 27 2023
Sanded the plastic stabilizer tips to make edges flat.
By a reason I cannot understand the parts C75T1-11 tip rib do not have predrilled holes in my kit. The Assembly Manual assumes they should be.
I send an email to Zenith and talked to Roger on Oshkosh.
Yes, it is an error. The holes should be there. But instead of asking Zenith to fabricate and send me the new parts I decided to drill them. After all it is a part of fun.
I draw a 10mm line from…
Added by Alexander Samoylovich on October 27, 2023 at 12:52pm — No Comments
Zenith Aircraft Kit Building Workshop Returns to Florida: December 1 & 2, 2023
Zenith Aircraft Company is returning to Florida in early…
ContinueAdded by Zenith Aero on October 9, 2023 at 2:30pm — 4 Comments
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
1999
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).