Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Alexander Samoylovich's Blog – November 2023 Archive (10)
Zenith 750 Cruzer, Strut attaching point
September 03 2023
Drilled the spar.
Built the strut attaching point. Used a long flexible drill to drill wholes on the side.…
Added by Alexander Samoylovich on November 23, 2023 at 9:12am — No Comments
Zenith 750 Cruzer, Clecoed the whole bottom side of the wing
September 01 2023
Clecoed the whole bottom side of the wing
Added by Alexander Samoylovich on November 21, 2023 at 8:08am — No Comments
Zenith 750 Cruzer, Level the wing skeleton
August 31 2023
Levelled the wing skeleton using shims.
Clecoed the wing outbound bottom skin.…
Added by Alexander Samoylovich on November 18, 2023 at 1:10pm — No Comments
Zenith 750 Cruzer, Started the wing bottom skin
Added by Alexander Samoylovich on November 16, 2023 at 11:52am — No Comments
Zenith 750 Cruzer, Started building a wing
August 15 2023
Started building a wing. Clecoed the skeleton. Flattened a nose rib flange to fit the spar better.…
Added by Alexander Samoylovich on November 13, 2023 at 3:25pm — No Comments
Zenith 750 Cruzer, Build a foldable flapperon rack and stored the flapperons on the attic
August 11 2023
Build a foldable flapperon rack and stored the flapperons on the attic.
One screw per leg. Two screws total. The legs rotate and pinch the horizontal bar. No glue. No special value. Just for fun.…
Added by Alexander Samoylovich on November 12, 2023 at 12:30pm — No Comments
Zenith 750 Cruzer, Finishing flapperons
Added by Alexander Samoylovich on November 5, 2023 at 8:34am — No Comments
Zenith 750 Cruzer, Working on flapperons
August 09 2023
Fabricating and drilling the inbound flapperons L angles. I used the method described in the Homebuilt Help. Used the flapperon arm as a conductor.
Added flapperon tips.
Riveted the flapperons.…
Added by Alexander Samoylovich on November 4, 2023 at 9:54am — No Comments
Zenith 750 Cruzer, Deburring the right outbound flapperon
August 01 2023
Deburred and covered with cortec the right outbound flapperon.
Added by Alexander Samoylovich on November 2, 2023 at 4:07pm — No Comments
Zenith 750 Cruzer, Starting flapperons
July 31 2023
Stored the stabilizer and the elevator on the rack.
Clecoed the right outbound flapperon skeleton.…
Added by Alexander Samoylovich on November 1, 2023 at 12:48pm — No Comments
Latest Blog Posts
- Zenith 750 Cruzer, Preparing L angles to the top skin
- Zenith 750 Cruzer, riveted the flapperon arms
- Zenith 750 Cruzer, Clecoed the right wing skins
- Zenith 750 Cruzer, Strut attaching point
- Zenith 750 Cruzer, Clecoed the whole bottom side of the wing
- Zenith 750 Cruzer, Level the wing skeleton
- Zenith 750 Cruzer, Started the wing bottom skin
Most Popular Blog Posts
- Zenith 750 Cruzer, Stabilizer hinges and the weight balance arm
- Zenith 750 Cruzer, Working on flapperons
- Zenith 750 Cruzer, Clecoed the right wing skins
- Zenith 750 Cruzer, elevator, L angles
- Zenith 750 Cruzer, Finishing the elevator
- Zenith 750 Cruzer, riveted the flapperon arms
- Zenith 750 Cruzer, Level the wing skeleton
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
